Help: 60% over injectors

[cafryer]

Im almost ready to order new injectors was stuck between 45 and 60% overs. Can 60% still be streetable.

 

[Dirtymaxx03]

yes

 

[05chevy]

100% is streetable with the right tuning

 

[cafryer]

what kind of power is posible out of 60%

 

[Noreaster]

seen some dyno sheets posted 9XXhp with twins

 

[paint94979]

Camomax ran 10.1x on 60% overs

 

[cafryer]

Im thinking thats what im going to go with

 

[ecc_33]

Yep, 10.13's were done on 60 overs. They are very streetable and is whats going in my truck when i build the engine. If you go smaller you will regret it:thumb:

 

[delong_1]

i would do the 60's, at high altitude 100 overs are a pain to try to tune and from my experience not really necessary unless its a comp only truck.

 

[cafryer]

What kind of pulse width would be a good start

 

[Chevy1925]

Mid-lower 10s have been done on 45% overs too fyi

 

[cafryer]

I dont have triples lol.

 

[Chevy1925]

I dont have triples lol.

A nice set of twins will do the same.

 

[hondarider552]

What kind of pulse width would be a good start

It varies..

 

[Cap'n Willis]

Im almost ready to order new injectors was stuck between 45 and 60% overs. Can 60% still be streetable.

60 overs are very streeteble, you will love em with that billet 366 :thumb:

 

[05chevy]

Camomax ran 10.1x on 60% overs

Also made 920hp on a 2.6 charger with 60% fuel only iirc

 

[boss760]

I would not waste money on anything smaller then 60. I have 100s, and they drive fine on the street.

 

[cafryer]

Cool i put in the order today. Im excited. Hopfully the truck will be done for industrial injection dyno days.

 

[Jscherbs]

nice! :thumb:

 

[Noreaster]

Also made 920hp on a 2.6 charger with 60% fuel only iirc

2.6 inlet on cut down 3.0 compressor