it can be done, you either need a new front diff or you need the bracket from cognito, stock knuckles, stock bolts for the CV shafts (RCD uses a spacer and longer bolts to attach the CV's to the diff), you have to cut an ear off the frame for the mount of the front diff and this needs to be welded back on, new front shocks, new sway bar endlinks, the tie rods have to bee spun back around and you will have to cut off the brackets that were welded to the torsion bar x-member for the stiffining bars, smaller tires, and remove the block in the rear, which you will probably need new u-bolts for!
