5" Intake

[Akdiesel]

That's true...I'll see what JMK comes up with and decide from there.

 

[Akdiesel]

I put a black line on one of the pictures but suck at picture editing and tried to type what I wanted on there....either way from the black line to the air filter with a MAF bung is what I would like

 

[JMK777]

you want 5" all the way to the filte from that big rubber elbow?

 

[Akdiesel]

yes sir...the turbo has no v-band or anything it's just a flat round 5.5" opening if that makes any sense

 

[Chevy1925]

hmm looks like its something that could be done fairly easily, course when i say that it never is lol. Only found one place that has 5" 90* bent tubing at 52 bucks a piece. You would probably have to loose the air box though to make it fit right

 

[Akdiesel]

Yeah I kind of figured I'd lose the box and just sell the S&B as a complete deal...it's a great intake I'd just rather stick with 5".

 

[Chevy1925]

Yeah I kind of figured I'd lose the box and just sell the S&B as a complete deal...it's a great intake I'd just rather stick with 5".

yeah. shouldnt be bad to do a 5" intake from the elbow to where the air box would be. 2 90* 5" tubes and maybe a straight section + your maf sensor bung and your good to go! If i had a LLY here i could get something made up for you but teh old LB7 wont cut it lol

 

[SSchmi5519]

I know steve has a big arss 5.5" or 5" elbow (cant remember) on his lly with a S472 and t4 ped.

OR DO I?!?!? hyschic:

 

[Akdiesel]

man I wish I'd have bent that goddamn AC line..

 

[Chevy1925]

OR DO I?!?!? hyschic:

Haha bout time you get that turbo! you gunna put a better CP3 on too?

man I wish I'd have bent that goddamn AC line..

it sucks when you dont have the tools to fix these trucks.

 

[Akdiesel]

trust me I'm looking at a fairly pricy fix to get the AC up and running again

 

[Chevy1925]

trust me I'm looking at a fairly pricy fix to get the AC up and running again

really. well if it will save you anything, your welcome to make a trip out here. wont charge you anything to do it all. its really easy and not technical. jsut takes about 2-3 hours to do

 

[TrentNell]

:hello: Call me Tony , I can build a real nice piece , but it would be a few week wait .

 

[paint94979]

Maybe you can make me one too

 

[TrentNell]

Maybe you can make me one too

:nod:

 

[kivetts04dmax]

Old thread, but looking to price together a kit for an s400 turbo and would also like to run a big intake for it..

 

[Kutchey2]

Ill have a friend of mine post a pic of a 5.5" I made for his twin setup.

 

[paint94979]

Old thread, but looking to price together a kit for an s400 turbo and would also like to run a big intake for it..

Contact Trent at EPR he has full bolt on kits for the S400 turbos.

 

[kivetts04dmax]

I know his kits are top notch but I will be able to piece one together for about $900 less because I get parts at cost, however I might contact him on just a couple pieces or the kit alone since I can get turbos for cheap..I know there is his cost in labor in there too and he does make nice products!

 

[zimmerma323]

A buddy of mine is a good fabricator and does a lot of stuff for Tony B and his crew. He just fab'd up a 5" elbow for a custom twin setup on a customers truck. I only have pic's of the mock up unit, not the finished unit. He also has access to a mandrel bender and can get anything bent up that you want. If you need his info, just pm me and I'll send it over.