LMM: 325/60R18 on 9" wide rims. Pics needed.

[TwoTone]

Anyone who has a set up like this could you show me some pics? Truck is already leveled. Im not worried about them being to tall just to wide mostly. Ive been down the trimmed road before and I want to keep a truck pretty clean for once

 

[Relentlesscummins]

they should fit fine with the right offset

 

[wsmithduramax]

Here is a couple of bad pics, I think these are -10 offset.

 

[SparkZ03DMAX]

Here's my truck with 325/60/R18s

 

[TwoTone]

I dunno those might be to wide for my 08

 

[Devon]

Spark you have a sexy ass truck lol you always come through with nice pics and vids looks real nice you rub alot? Or any at all


Sent from my iPhone using Tapatalk

 

[SparkZ03DMAX]

Spark you have a sexy ass truck lol you always come through with nice pics and vids looks real nice you rub alot? Or any at all


Sent from my iPhone using Tapatalk

I rub just a little when i have the wheel turned completely left or right. The bumper is trimmed to help, but i hit the back side on fender well slightly.

 

[calabria69]

I have a six inch lift and 325-60-20's work perfect....-26 offset....325's are equivalent to a 35" tire I believe....????

 

[TwoTone]

Interco's site says the size I posted is a 33/13 equivalent

 

[SparkZ03DMAX]

Spark you have a sexy ass truck lol you always come through with nice pics and vids looks real nice you rub alot? Or any at all


Sent from my iPhone using Tapatalk

I rub just a little when i have the wheel turned completely left or right. The bumper is trimmed to help, but i hit the back side on fender well slightly.

Forgot to say, THANKS! :thumb:

 

[HogAssWild]

325/65 is 34.9x12.5 inchs in a nitto

yes you can fit them on a lmm (smaller fender wells) but it will ruin your suspension quick and ride horrible... been down that road to:thumb:

i would lift it or run a little smaller tire.. but yes it will fit

 

[calabria69]

Just googled it, says that it is slightly bigger than a 35....:hug:

 

[TwoTone]

http://www.intercotire.com/help-article.php?article_id=7

 

[cody102]

Just googled it, says that it is slightly bigger than a 35....:hug:

On a 20 inch rim they would be taller. 325 just meanes the width of the tire. Its the 60 what gives you your sidewall heigth. 325/60-18 is a 13.5 wide by 33 tall

 

[SASKDMAX03]

325mm = 12.8 inches wide and ((325x.60)x2)x25.4+18 = 33.3inches

 

[sparepartsracing]

leveled

lowered

 

[c_mo88]

Here is a couple of bad pics, I think these are -10 offset.

is anything done to your truck suspension wise?? im just wondering because i have an 02 and i like that size tire and rim combo :thumb: looks great!

 

[Devon]

What offset? And backspacing? I'm looking to lower my truck and them 325/60s look sick? Any rubbing ?


Sent from my iPhone using Tapatalk

 

[smarquis]

325/60R20s are 35"

If the 325 is too wide for you, I would try to stick with a 285 of the same height. I just went from 325/60R20s to 285/65R20s and they look pretty close to the same. The truck seems much easier to steer too. Here are pics before and after the new tires (the new 285s are on the BMF black wheels).