30MM X 1.5 Tap
- Thread starter the4wheeler
- Start date
dammm did i drop the ball or what! lol
hear it is after a few months of service does have small seeping in my welds at the base witch i haven't addressed yet and still haven't finished out my oil cap LOL but defenetly made more room in the aria of the intake bridge witch is what i needed for the next step witch i keep saying im gonna do one of these days
hear it is after a few months of service does have small seeping in my welds at the base witch i haven't addressed yet and still haven't finished out my oil cap LOL but defenetly made more room in the aria of the intake bridge witch is what i needed for the next step witch i keep saying im gonna do one of these days
Attachments
lol just wanted to make sure you could see all the dirt and dust
i hope you are talking about the SS welds ( thank you)
still have a long way to go in my aluminum welding before it looks like some of my SS welds
i hope you are talking about the SS welds ( thank you)
still have a long way to go in my aluminum welding before it looks like some of my SS welds
yeup still have drawing hear a photo of the test piece i made the top was cut to have groove to index the riser pipe i think was 2 inch aluminum pipe i dont remember it might have been Sch. 40 or 80 the piece i made for mine was out of .75 plate and made the index groove about .125 deep
sorry for the massive photo aging
it might be a little time before i could git to cutting out one or more
that little notch is necessary to clear the head of the bolt so if you plan on making one you will have to accout for that i was able to cheet a little by switching to socket head bolts ( Allen heads) instead of the factory bolts
i might be willing to provide the DXF to any one who wished to knock one out on there own CNC
sorry for the massive photo aging
it might be a little time before i could git to cutting out one or more
that little notch is necessary to clear the head of the bolt so if you plan on making one you will have to accout for that i was able to cheet a little by switching to socket head bolts ( Allen heads) instead of the factory bolts
i might be willing to provide the DXF to any one who wished to knock one out on there own CNC
Attachments
Last edited:
sure you can have my prototype plastic piece lol
if i sold the pipe i am running it would be a step backward toward the ultimate goal making a true shaker cowl induction hood ( think early trans-am) but with stilling a bit bigger and matching the hoods overall lines and shape
ill see if i can git some photos up in my garage if the intake
lol if i sold the pipe i am running it would be a step backward toward the ultimate goal making a true shaker cowl induction hood ( think early trans-am) but with stilling a bit bigger and matching the hoods overall lines and shape
ill see if i can git some photos up in my garage if the intake
Last edited: