305/55/20 on 20x9

[maine dmax]

Anyone run/have pics of a 305/55/20 on a stock height truck? Going back to stock height and want to run these on my BFM 20x9 5.5 bs. Any thoughts?

 

[Ryan T]

i run bmf 20x9 , i think 305 55 20 are too big if its stock height, they might rub a little bit unless u trim a little..

 

[z79outlaw]

Should only need a little trimming since your runnings the 9's.

 

[jacobdewey]

I had to trim quite a bit and I was only running a 305/50/20 on a 20x9 -12mm offset.

 

[battlegraduate09]

 

[Houser04lly]

 

[Houser04lly]

 

[Houser04lly]

305/50/20 Torsion keys turned up slightly

 

[DIESELMAFIAPER.LB7]

heres mine 305/55/20 nitto trails m/t -25mm offset

 

[catman3126]

sub

 

[JoshH]

I've given up trying to run a 305 width tire on my 9" wide wheels. I could never get much tread life out of them. I kept wearing the center out of them, and I was most definitely not over-inflating. I'm currently running a 285/55R20, and they seem to be wearing very well, and are about the same height as the 305/50R20s I had been running before.

 

[catman3126]

Lets see a pic of your JOSH H? how much backspacing?

 

[TROJAN366]

I'll get a pic when I can. I have 305/55/20 Toyo AT2s on 20x9 kmc addicts. I have the front valence trimmed a little bit so that isn't an issue. They do however rub in the back of the fenderwell. Need to do some minor trimming so that I dont have to put the bars all the way up. I probably have 1/2-3/4 of an inch of thread still available

 

[maine dmax]

Looks really nice! Is that leveled? Are those 305/55/20 on the BMF's? Thanks

 

[maine dmax]

heres mine 305/55/20 nitto trails m/t -25mm offset

Looks good man! Stock height? Thanks