3" Drop with BMF's

[RedDmaxLBZ07]

I am going to lower my truck back to stock in the front and put 3" drop shackles in the back. The BMF's I have a offset of 0. I have 305/55/20s on them right now and they already rub a little. I am thinking about buying 305/50/20 cooper zeons and I'm wandering if they will rub. I want to get some opinions on these tires before I order them.

 

[BLKLMM]

Might rub a little....285/50/20 would be better:thumb:

 

[Jscherbs]

i had 305/50/20 zeons on BMF's with my tbars at stock height and they didnt rub at all.

you should be all set, i would try the 305/55's and see if they fit, cant hurt, much

 

[sddmax]

I have 20X10 nova's -19 0ffset on my 07 with 3" drop and t-bars dropped all the way down, running a 285/55/20 and they dont rub at all. Had to trim the back lower portion of the fender some tho

 

[RedDmaxLBZ07]

i had 305/50/20 zeons on BMF's with my tbars at stock height and they didnt rub at all.

you should be all set, i would try the 305/55's and see if they fit, cant hurt, much

With a sawz all, anything can happen! :woott:

 

[zimmerma323]

I have 20X10 nova's -19 0ffset on my 07 with 3" drop and t-bars dropped all the way down, running a 285/55/20 and they dont rub at all. Had to trim the back lower portion of the fender some tho

Do you have any pic's of the truck dropped with the BMF's? I've got a 3/5 drop coming but am trying to figure out what wheels to go with. I'd like to go with a BMF if I can squeeze them in there.

 

[sddmax]

Some pictures

 

[zimmerma323]

Awesome! Yeah BMF is the route I'd like to go, I may go with a 50 series tire just in case. Thanks

 

[Jscherbs]

Some pictures

post pics of your fender mod!!!

 

[RedDmaxLBZ07]

^x2!

 

[sddmax]

I'll get some pics after work

 

[Grizz3500]

Also interest.

 

[Harbin_22]

Awesome! Yeah BMF is the route I'd like to go, I may go with a 50 series tire just in case. Thanks

50 is only part of the equation. The width will throw off the 50 ratio. I did the norcal fender mod to my LMM with bars dropped all the way with 285/50 20x9 novakanes to get them to clear with absolutely no rubbing

 

[RedDmaxLBZ07]

I'll get some pics after work

Did you ever get a chance to take some pics?

 

[Ryan T]

Irun 285 50 20 on a bmf 20x9, ive had my truck lowered 3/6 with no rubage!Its not as low as it used it be, in my avatar its about a 2/4 drop, thats how it sits now and rides very,very nice this way!

 

[sddmax]

Did you ever get a chance to take some pics?

Havent had a chance yet. I looked at the norcal fender mod thread and thats pretty close to what i did :thumb: