Question: 2xCP3 1 modded 1 stock?

[seth999]

Was wondering if anybody has done a modded valley pump and stock 2nd pump...I know some people have had problems with it but was wondering if it would be best to get dual modded pumps or just run a stock LBZ pump.

 

[ChevyDieselLLY]

I know some guys that have ran em that way. Trent has a modded for his dual I think and a stock in the valley. But I could be wrong on that. Who's modded pump do u have and who's kit are u going with?

 

[maxpower91]

I have 15% over in the valley and a stock one for the second..

 

[seth999]

have a floor it in the valley and going with a PPE kit

 

[ecc_33]

I too have a modded one in the valley ( just a modded FPR) and a stock lb7 pump for the second pump.

 

[05_LLY]

I ran a arson kit pump in the valley and a stock lb7 on a lly with no issues, currently running a stock lb7 over a lly both with lbz regulators, Im not sure modded pumps are really needed til north of the 1000RWHP area!

 

[seth999]

Yeah I guess I'll try it out...if it doesn't work I could just send the pump off

 

[SmokeShow]

If it were me, I'd run the modded pump up top & stock one in the valley. It just seems to me that the modded ones tend to have more longevity issues than stock ones and it'd be a load easier to swap if it's up top & not down in the valley.


That's just my opinion & what I'll be doing.

 

[seth999]

thats a good point might try it out like that and see how it does...would save time in the long run