2wd chassis to 4wd

1FastBrick

Well-known member
Dec 1, 2016
2,600
1,117
113
Junkyard
I was told when I tried to order them that they were never available separately as a Serviceable part.

Supposedly they are bonded in place.

My thought was to try and use a control arm bushing.

I think the hanger bushing like you are linking is too long.
 

1FastBrick

Well-known member
Dec 1, 2016
2,600
1,117
113
Junkyard
Ok Mr. smarty pants here you go in metric measurements. Atleast the front part that goes through the frame.🤣

I think this is the correct differential to frame bracket 15999801 but I could be wrong....

1000016923.jpg
1000016921.jpg1000016922.jpg
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,676
1,943
113
Mid Michigan
I literally just randomly looked at that one, Brick. Its roughly 70mm long, not 66.
But that leads me to believe that there is one out there that could work. Just need to be able to accommodate a 14mm bolt.
 
  • Like
Reactions: 1FastBrick

2004LB7

Super Moderator
Staff member
Dec 15, 2010
7,107
2,209
113
Norcal
I don't see why the part Tom linked too wouldn't work. As long as the diameter is correct. It could be chopped shorter if needed.

Is that 14mm bolt fixed into the bracket and not removable?
 

1FastBrick

Well-known member
Dec 1, 2016
2,600
1,117
113
Junkyard
I literally just randomly looked at that one, Brick. Its roughly 70mm long, not 66.
But that leads me to believe that there is one out there that could work. Just need to be able to accommodate a 14mm bolt.
it's possible!

I looked on EBay and they say that's a 1500 bracket for the front differential. I don't have a 2500 unit here at the house that separate.
 

2004LB7

Super Moderator
Staff member
Dec 15, 2010
7,107
2,209
113
Norcal
  • Like
Reactions: 1FastBrick

1FastBrick

Well-known member
Dec 1, 2016
2,600
1,117
113
Junkyard

View attachment 127524
There you go. Still need a frame sleeve though
 

PureHybrid

Isuzu Shakes IT
Feb 15, 2012
3,517
501
113
Central OH
I was told when I tried to order them that they were never available separately as a Serviceable part.

Supposedly they are bonded in place.

My thought was to try and use a control arm bushing.

I think the hanger bushing like you are linking is too long.

That's what I was told by the dealer when I did this back in 2016, couldn't order the bushing. I have an Energy bushing in mine, just went to the local machine shop and had them cut me a piece of tube that was a hair smaller than the bushing OD. I do not remember what schedule pipe it was
 
  • Like
Reactions: 1FastBrick