2005 rclb build

[03spoolindmax]

Well I finally sold my 03 ccsb and picked up a 2005 rclb. I was able to swap my built trans, MA mounts, tcase brace & lift pump into it. It was a work truck it's whole life and a little beat up. I put a better shape bed on it. The deal from the owner was he was sending it to the body shop to get the rest of the dings out of it and it's getting repaint. I stopped by HSP yesterday and picked up one of joes twin kits for it. It'll be a s480 over stock setup. I also picked up some MA tie rod sleeves, all season centerlink brace, FTE 7" black stack kit with the 30" muffler/resonator, 2" bell tech lower shackles, lml manifold, roll pan and a few other things. Truck is currently at the body shop until next week. Once I pick it up I'll start putting the rest of the parts on it and will be giving the guys at ATP a call for an autocal. I'll miss my lifted crew cab but decided to go in a different direction for the new truck.

Sent from my iPhone using Tapatalk

 

[03spoolindmax]

I also have to show off my sweet rental for the week until my trucks done.

Sent from my iPhone using Tapatalk

 

[DieselmafiaLLY]

Cant wait to see it come together......then ill come by and we race

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[03spoolindmax]

Cant wait to see it come together......then ill come by and we race

Sounds good to me. Maybe we can get a bunch of guys together and head out to Milan one day.

 

[DieselmafiaLLY]

I tried to do that this summer!! Nobody was down. But im game

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[ikeG]

Its possible to switch motor mounts with motor still in truck?

 

[DieselmafiaLLY]

Yes sir

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[Harbin_22]

The drivers side on my LMM was a pain but the passenger is easy. Harder to get the stock ones out since they are one piece

 

[03spoolindmax]

I've done enough mounts to where I can do both sides in about an hour. If you remove the starter it makes the passenger side a lot easier. I noticed if you separate the mount on the driver side. Bolt the 1 half to the block then attach the 2nd half before you lower it back onto the frame mount. It makes it go a lot smoother with less cussing.

 

[DieselmafiaLLY]

Wanna do mine?

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[03spoolindmax]

Maybe after I finish my truck

 

[DieselmafiaLLY]

Deal lol. I wanna see this thing, what u gonna do for wheels and tires?

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[03spoolindmax]

I realized I forgot the mention that. I ordered up some 18x9 +18 offset xd hoss with a 285/60r18 terra grappler. Rims are a month and a half out. So I gotta run steelies until then.

 

[DieselmafiaLLY]

Ahh got ya that'll be nice! I really wanna go to 22's but sooo much power loss

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[03spoolindmax]

I need side wall still because I head out to silver lake sand dunes every year. Besides rims and tires are twice as much at the size. I got a pretty good deal on mine. That's the only reason I got them.

 

[Jscherbs]

Looking good buddy better come out Friday the 13th for my bonfire!

 

[DieselmafiaLLY]

U cut down 3 more 50footers to burn??

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[1slomax]

Ahh got ya that'll be nice! I really wanna go to 22's but sooo much power loss

Sent from my SAMSUNG-SGH-I537 using Tapatalk

isnt that much of a loss

 

[DieselmafiaLLY]

With 22's ? I bet its very noticeable

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[03spoolindmax]

Looking good buddy better come out Friday the 13th for my bonfire!

I took the day off work to pick up the truck from the body shop. If I can get an exhaust on it I'll come on out. It's an open down pipe right now lol.