2001 Allison 1000 2-3 Shift Issue

TyLewis

New member
Aug 2, 2024
4
0
1
Chevys98
Alright i’m to my ends of this trans issue. She’s a 2001, whenever your at wide open throttle the truck just doesn’t shift from 2-3, it’ll sit there and hang in 2nd till you let off the throttle a little bit then it shifts. it’s gotten worse and worse. I thought it was physical problem, so i bought a core and build a new trans. well… same issue. i’ve changed all speed sensors out thinking that might be it, brand new NSBW, internal wiring harness on the valve body, fuel filter head along with fuel filter, and both lift pump filters, does this in all tune settings 1-5 as well as stock files. Also would like to add that I used a different valve body which is why i don’t believe valves are sticking. If anybody has anything thoughts It would be very much appreciated!


Sent from my iPhone using Tapatalk
 

TyLewis

New member
Aug 2, 2024
4
0
1
Chevys98
What's the fuel pressure at WOT? Actual vs desired?

desired goes at 23k and and actual is at the same and goes to 23.5k and then at the end of 2nd at about 3400 rpm and then held about 3500 rpm and hangs for a second before it shifts


Sent from my iPhone using Tapatalk
 

2004LB7

Super Moderator
Staff member
Dec 15, 2010
7,104
2,207
113
Norcal
From my experience this type of shifting issue, if no transmission codes, is usually an engine power issue. Lack of torque based on what's expected vs what's being made. Same shifting can happen during limp mode too

Might want to put all tuning back to stock and see if the issue persists. If so, monitor rail pressure, fuel MM3, transmission temps, converter slip and maybe more