Question: 17" wheels
- Thread starter MTNMAX
- Start date
yep a bad noise only when turning though, but now I have clearance went mickey Thompson wheels with 3.62 back spacing. I think I got carried away with backspacing but need room for chains. tires are about done now and there are more choices in 17" really like the looks of toyo rts maybe on a 17"x 9 with 5" backspacing. Cognito recommends 33" on 8-10" wide with 4.35-5.15 backspacing. I tried 4.5 bs with 16 wheels but not enough clearance, was wondering if anyone has this set up with 17s
4" Cognito non torsion drop lift, kryptonite uca's, tie rods and center link
4" Cognito non torsion drop lift, kryptonite uca's, tie rods and center link
Attachments
I just ordered toyo open country m/t 295-70-17's for my 2009 was going to use stock rim was told they should work. they are 33's
guess im going to find out..
guess im going to find out..
17,s
you will probably need to level front. I ran 285/75 16 on stock wheels on 07 but did have tbars cranked now that I have 4" lift my stock wheels cause rubbing on uca's
you will probably need to level front. I ran 285/75 16 on stock wheels on 07 but did have tbars cranked now that I have 4" lift my stock wheels cause rubbing on uca's
H2s are always a good bet for temp wheels and you can find them cheap. I bought 2 sets, 1 nice chrome set for $100 and a nice $125 "alloy" set for winter. They'll get you by until you find something better, probably cheaper, stronger & safer than spacers.
H2's are 17x8.5 +18 offset. When I was leveled and running 285/79/17's they would rub the uca at full lock turning left. After lowering the front suspension to stock everything was good. But was very close to touching. With stock uca's the h2's fit fine.
they will rub wondering if anyone has cognito 4" lift and what they're running. I have 16x7 with -8 offset now but would like to go 17 a common wheel is 17x9 with 0 offset