13:1 Compression?

McRat

Diesel Hotrodder
Aug 2, 2006
11,249
26
38
64
Norco CA
www.mcratracing.com
Detroit Diesel - MTU 4L890 Characteristics
  • 4-Stroke Diesel Type of Engine
  • 4 Number of Cylinders
  • Inline Cylinder Arrangement
  • 4.53 in Bore
  • 4.21 in Stroke
  • 271 in³ Displacement
  • Power hp at rated speed 550 hp @ 4250 rpm
  • 920 Nm @ 4250 rpm Max torque at speed
  • 13:1 Compression Ratio
  • Common Rail direct injection
  • Peak Injection Pressure 1800 bar / 26125 psi
  • Peak Cylinder Pressure 212 bar / 3074 psi
  • Induction Air Consumption 4514 lbs / hr
  • Fuel Flow @ Maximum Power 196 lbs / hr
  • 4.39 Turbo Pressure Ratio

This is a diesel powerplant being tested by the US Army (TARDEC). That's about 50 PSIG boost, for those in Rio Linda.
 

deHuncho

New member
Jun 18, 2009
76
0
0
SW Va.
Am I reading correctly, that would be 271cubic inches and 550hp in a 4cyl that is also rated to turn 4250rpms from factory? That thing sounds awesome:thumb:
 

D-MAX Mafia

Hood down, smoke up!
Nov 4, 2009
1,112
13
38
Phoenix
One of the locals here in Phoenix runs JP8 in his de-stroked Ford. I don't know what it would do in a Dmax but it might be worth a shot?.

There is an airport about 5 minutes from my house that has it. I might do a 50/50 mix and see what happens! With a couple quarts of Type F of course!