1/4 mile discussion and time slips post here!

[TheBac]

I thought brokesmoker was already on the list? I dont see his name....must be getting old...

 

[paint94979]

Oh good lord.

that's what i said

 

[MarkBroviak]

Tony Burkhard/DHD

Tony got some more testing in with the Last minute hooker truck that he competed at UCC with and is making progress in the right direction! This weekend he got a nice pass out of it on tune 2! Truck is an LBZ 5500lbs Allison transmission 4x4 with my tuning and ran a [email protected]! Can't wait to see what it will do when it leaves smooth and we can turn the power up on it!

https://www.youtube.com/watch?v=oypYSuI3Hqs

 

[JoshH]

I have a new entry for the list. The TNG Shop Truck just clicked off this pass in the heat out here at Ennis. It is a 2008 RC/SB 2wd tuned by me. I’ll weigh it later tonight.

 

[1TRIKHD]

I have a new entry for the list. The TNG Shop Truck just clicked off this pass in the heat out here at Ennis. It is a 2008 RC/SB 2wd tuned by me. I’ll weigh it later tonight.

Sweet!

 

[MarkBroviak]

Congrats Josh!:hug:

 

[JoshH]

Thanks guys. It’s always good to have more 2wd trucks on the list, right Mark?

Truck is a little lighter than I remember. The scale showed 5940 with me in it.

 

[TheBac]

One of these days I'll get to updating this....

 

[MarkBroviak]

One of these days I'll get to updating this....

It's ok, we will just keeping piling more up so it makes it feel like you are getting more accomplished when you do it buddy!:hug:

Yes Josh, more 2wd's on the list would be great, all I hear about is the fact that mine would be sooooooooooo much faster if it was 4x4, I don't care about that lol! Hell, yours is lighter than mine also!!!

 

[coker6365]

I sure wish this 6.76 was on a 1/4 track. I have been dying to hit the 10's. Maybe we can squeeze something out this weekend.

Sent from my SM-G930V using Tapatalk

 

[lutzjk913]

I sure wish this 6.76 was on a 1/4 track. I have been dying to hit the 10's. Maybe we can squeeze something out this weekend.

Sent from my SM-G930V using Tapatalk

Man. That’s mid to low 10’s. Lol

 

[coker6365]

Man. That’s mid to low 10’s. Lol

Lol, right! Just my luck.

Sent from my SM-G930V using Tapatalk

 

[lutzjk913]

Lol, right! Just my luck.

Sent from my SM-G930V using Tapatalk

How far is a 1/4 mile track from you?

 

[coker6365]

How far is a 1/4 mile track from you?

30min. We were in East Texas for the 1/8 at Diesel Thunder. Didn't have a choice on the track.

Sent from my SM-G930V using Tapatalk

 

[Subman]

That pass would be about a 10.67 @ around 132mph give or take a mph or two.:thumb:

 

[CaptPhil]

My 10.67@133 was a 6.96@104 eighth with a 1.66 60'. I think your pass would be in the 10.45 range.

Sent from my SM-G900V using Tapatalk

 

[coker6365]

Rub it in! Lol. I have only been trying to get a 10 sec slip for a few years.

Ran a 11.0 on the last motor before we tore it down and built this motor. So close but so far away.

Sent from my SM-G930V using Tapatalk

 

[JoshH]

I'm pretty sure I told you that pass would have been somewhere around a 10.5 in the 1/4.

 

[coker6365]

I'm pretty sure I told you that pass would have been somewhere around a 10.5 in the 1/4.

You did, I just want it on paper!

Sent from my SM-G930V using Tapatalk

 

[Ne-max]

Usually back half is where crap gets real.