1/4 mile discussion and time slips post here!

[Subman]

Well it looks like I wil be getting myself a 01 reg cab 2500HD and look like Max out lol and the 06 will be a reg tow truck.

Good deal, you going to build a super street or prostreet truck or one that can race both?

As far as Dirty Max, it uses EFI live and Rob has been helping them. I don't know what the Banks trucks use. I'm not sure there is an off the shelf programmer you can buy that could make that list anymore. Steve Cole tunes Buck's truck, BoBo tunes Mika's, I know Rob tunes a bunch of them as well as do the other good tuners but who tunes what I'm not too sure.

 

[sweetdiesel]

Good deal, you going to build a super street or prostreet truck or one that can race both?

As far as Dirty Max, it uses EFI live and Rob has been helping them. I don't know what the Banks trucks use. I'm not sure there is an off the shelf programmer you can buy that could make that list anymore. Steve Cole tunes Buck's truck, BoBo tunes Mika's, I know Rob tunes a bunch of them as well as do the other good tuners but who tunes what I'm not too sure.

Trent and I both tune our own trucks we just enjoy sharing our findings
Trent has done most of the work this year as far as testing because I've been busy!

Sadly IMO EFI in a gasser world is mostly self tuning guys here could actually do better if they tuned it them selves jmho

road runner is the best tuning tool u could have! Trent and I both have similar trucks and they run way different!


Rob has done really well, Pat has done really good with casper to you have to think he ran a 10.5 years ago with stock stick iirc and a single turbo!

I want to see the top 50 be 10.99 or less next year so we can actually compete with the cummins

 

[ChevyDieselLLY]

I want to see the top 50 be 10.99 or less next year so we can actually compete with the cummins

its getting there.

 

[ripmf666]

We have a 01 1500 suburban that I got for the gf that I let go oh my 01 2500hd 8.1 for that she wanted. We'll it's parked all the time I bet she's only put 4,000 miles on it in 4 3 years if it's that many miles. She's alway driving my truck. So I so the listing the one guy posted for a 01 for around 9,400 but there might be better out there. I want to build it to race and still drive around town if needed not a trailer bitc h lol. Figured I would swap a stock motor back into the 06 and use the build motor in the other truck. Any thouhts give them to me start a thread and I will move my junk over lol. Thanks for the help also would not mind sled pulling some with this truck also but 9's is what I want. :hug:

 

[Subman]

Trent and I both tune our own trucks we just enjoy sharing our findings
Trent has done most of the work this year as far as testing because I've been busy!

Sadly IMO EFI in a gasser world is mostly self tuning guys here could actually do better if they tuned it them selves jmho

road runner is the best tuning tool u could have! Trent and I both have similar trucks and they run way different!


Rob has done really well, Pat has done really good with casper to you have to think he ran a 10.5 years ago with stock stick iirc and a single turbo!

I want to see the top 50 be 10.99 or less next year so we can actually compete with the cummins

Forgive my ignorance but what is road runner? I'm not familiar with that?

 

[Kat]

Pat has done really good with casper to you have to think he ran a 10.5 years ago with stock stick iirc and a single

Even with :witch: driving :spit:

Simon your going to have to get licensed

BTW. Drunk posting from Nick Hotel. :happy:

 

[sweetdiesel]

Forgive my ignorance but what is road runner? I'm not familiar with that?

It is a ECM Ken but allows you to tune in real time i can do a full flash running down the track if i wanted to I have actually flashed the trucked after passing the water box on the way to the tree:thumb:

It is really just a time saver when tring to fix something and say you are trying to spool you can set it up so you just hit the enter button and it can increase fuel in a desired increment

It only works on the LB7 though. Mine has a direct usb cable that runs to the ECM from the cab

Moates road runner is the sight and Socal sells them

 

[Osubeaver]

That's pretty cool Simon, both the 144mph and the Roadrunner. I've been wondering if anybody is using it.

Not sure it would be of use to you or not, but I bought one of these programmable keypads to use in the truck with EFI Live. Seems to work well so far. http://www.fentek-ind.com/gen_keypads.htm#kp12u. Basically you can program each key for "macros" that can have up to I think 255 or something keystrokes. I need to finish setting mine up but basically I'm going to have big dummy buttons for connect, start logging, stop, save, clear DTC's, etc. They have lots of other keypad configurations too, and even foot pedals

 

[Subman]

Couple of typo's

Dmax Quick 50

--------------------------------------------------------------------------
1.Banks Rail 7.17 @ 181.08
2.Banks Sidewinder Type-D 7.72 @ 179
3.Dirtymax 8.82 @ 150.42 (7-24-10)
4.N20 Dmax 9.70 @ 129.47 (broke innercooler boot before the finish)
5.Max'd Out Rob 9.71 @ 140.96 (4-11-10)
6.Mike Woods Dmax Mustang 9.717 @ 147.88
7.Extreme Prejudice 9.87 (7-10-10) @ 146.13 (5-15-10)
8.Orange Crush 9.87 @ 139
9.Mika 9.897 (8-29-10) @ 138.70 (8-14-10)
10.Sweetdiesel 10.286 @ 144.09 (9-3-10)
11.Nasty Girl 10.35 @ 131
12.BadDmax 10.43 @ 132.31
13.J&R Auto GMC 10.465 (8-14-10) @ 131.38
14.Stingpuller 10.47 @ 131.75
15.Casper 10.59 @ 128
16.White Out 10.703 @ 130.39 (8-27-10)
17.Camomax 10.71 @ 130.54 (5-26-10)
18.Duramini2001 10.72 @ 138.566 (5-15-10)
19.Rhall 10.72 @ 128.0
20.OSUBeaver 10.73 (8-21-10) @ 127.62 (7-10-10)
21.Othrgrl 10.74 @ 135.94 (6-19-10)
22.NolanW 10.85 (9-3-10) @ 125.31 (7-24-10)
23.NLDP 10.85 @ 123
24.Rush/Big Bird/Kelly Froese 10.90 @ 129 (8-14-10)
25.J&R Auto Chev 10.973 (8-14-10) @ 126.15
26.Colin loydd 11.04 @ 125
27.eds04MAX 11.04 @ 124
28.MadMaxRacing 11.09 @ 123.14
29.JoshH 11.13 @ 123.49 (4-10-10)
30.HazMax 11.16 @ 124.48
31.estelly 11.2 @ 125.8 (5-8-10)
32.Matt Moon 11.2 @123
33.Newly 11.24 (4-9-10) @ 125.6 (6-11-10)
34.Micheal Tomac 11.24 @ 120
35.IBDMAX'IN 11.255 @ 124.77
36.Builtlngbd 11.30 @ 123.15 (8-21-10)
37.Diesel power 11.3 @ 123
38.jneal 11.301 @ 121.32
39.MaxPowerLB7 11.31 @ 122
40.winston 11.41 @ 120
41.Delong 11.42 @ 119.50 (8-28-10)
42.timLB703 11.47 @ 124 (CCLB Dually)
43.MarkVentling 11.506 @ 117.32 (10-3-09)
44.jpowel29 11.51 @ 121.8
45.Coalburner 11.53 @ 119
46.ripmf666 11.53 @ 116.92
47.Jerimiah M 11.539 @ 118.73 (4-10-10)
48.DuraDudz 11.55 @ 122
49.Fidel 11.595 @ 113.0 (8-7-10)
50.RickD 11.604 @ 114.32

 

[sweetdiesel]

Ken would you like this list to be a sticky?

and isnt it intercooler

 

[Subman]

It is a ECM Ken but allows you to tune in real time i can do a full flash running down the track if i wanted to I have actually flashed the trucked after passing the water box on the way to the tree:thumb:

It is really just a time saver when tring to fix something and say you are trying to spool you can set it up so you just hit the enter button and it can increase fuel in a desired increment

It only works on the LB7 though. Mine has a direct usb cable that runs to the ECM from the cab

Moates road runner is the sight and Socal sells them

My man Rob can do that, write someone elses tune as well all while cutting an .087 light on a .4 protree

Seriouly that sounds pretty cool. What do they cost?

 

[Subman]

Ken would you like this list to be a sticky?

Sure

 

[sweetdiesel]

That's pretty cool Simon, both the 144mph and the Roadrunner. I've been wondering if anybody is using it.

Not sure it would be of use to you or not, but I bought one of these programmable keypads to use in the truck with EFI Live. Seems to work well so far. http://www.fentek-ind.com/gen_keypads.htm#kp12u. Basically you can program each key for "macros" that can have up to I think 255 or something keystrokes. I need to finish setting mine up but basically I'm going to have big dummy buttons for connect, start logging, stop, save, clear DTC's, etc. They have lots of other keypad configurations too, and even foot pedals

Great idea! I built a little stand for my laptop in the race truck....but i like big dummy buttons

 

[sweetdiesel]

My man Rob can do that, write someone elses tune as well all while cutting an .087 light on a .4 protree

Seriouly that sounds pretty cool. What do they cost?

I dont really remember? i think around 600 bucks?? When I first bought abby my ECM was kinda fubared i could not log it or flash it but the truck still ran fine. So i needed to get it fixed and guy just made it into a roadrunner ECM for me.

When i first flashed my truck with it....I honestly thought it didnt work because it was done in a matter of 3 seconds!

I know that Tony uses a road runner also. You dont have the EFI controller even plugged in when flashing you just use the EFI program on the laptop and it doesnt matter if the key is on/off. I am so use to it that when i flash my 05 LLY i get mad that it takes so long!:rofl:

It doesnt work that way for the TCM though but i rarely make changes on that.

 

[sweetdiesel]

Sure

Its done....most people dont read stickys so i wasnt sure if we should do it though

 

[Subman]

it will still show up in new posts and today's posts right?

 

[Noreaster]

I want to see the top 50 be 10.99 or less next year so we can actually compete with the cummins

as far as common rails theres more trucks with Dmaxs in the 10s than CR cummins

 

[TeaBagger2006]

Most of these Engines are lb7 and then lbz ..... Almost no lly or lmm
but then again there are some that I don't know so I will shut up.
The banks rail is an lbz , right?

 

[countrycorey]

I thought it I heard someone say it was an LMM???? Not 100% sure though

 

[custom8726]

Most of these Engines are lb7 and then lbz ..... Almost no lly or lmm
but then again there are some that I don't know so I will shut up.
The banks rail is an lbz , right?

Coming soon ^^