01duramax6spd-Please Explain

Status
Not open for further replies.

Rhall

Old Skooler
Aug 12, 2006
2,241
0
36
41
Texas Y'all
You started this Rob now drop it. Kinda lame calling me out cause I made a comment about SJD. I wasn't looking for a bunch of bullshit just making a statement ;)

You brought the other bull$hit into it proving my point, not me. Its not my fault i try and know my facts before i run my mouth. This is funny cause it seems like the same conversation with you about other pullers, only this time it is about me. All Bull$hit. Have a nice evening!:thumb:

P.S. Your tech support about who beats who in truck pulling sucks too.
 
Jun 22, 2008
332
0
0
Nebraska
I don't see what even started this thread :confused:. If a person can't make an honest post about his experience the what good is a forum. I never made anything up and all facts I stated were true. You just don't like them. You're calling me a liar and I'm not.
 

Rhall

Old Skooler
Aug 12, 2006
2,241
0
36
41
Texas Y'all
I don't see what even started this thread :confused:. If a person can't make an honest post about his experience the what good is a forum. I never made anything up and all facts I stated were true. You just don't like them. You're calling me a liar and I'm not.

Ok, well maybe you did get bad "tech support" from Tim. I was calling you out cause you have posted many lies about people i know before. Pullers running N20, this Broady character beating people he hasnt, and obviously i just proved that in this thread right here with results, and another good friend of mine that used to build clutches. This stems back way further than just what you said about Tim. You like to post what your think are facts about people on the open internet, and they are far from the truth. Maybe it just seems worse cause they have all been friends of mine, and now me myself, but i do see a pattern here.

Once again since not only do you lie, you cant read. I dont care what comment you made about SJD, i dont care what diesel shop you dont like or wouldnt reccomend. Im pretty sure i said that in the first post. You bought a USED turbo from someone Tim knew, and had a bad experience cause he didnt answer your pms. I get it now, those are facts indeed.
 
Last edited:

TIMTHECARMAN2004

Block Hole Maker
Sep 23, 2007
300
0
0
Yeah considering it doesn't even pertain to Rob :spit:.

Kyle, This is what happened... Rob was reading a thread and noticed that you talked negatively about me and then before I could even see it or ask why the thread was closed. No big problem. Rob then asked you to explain what you were talking about and informed me which I sent you a PM. My memory was jogged and I remembered the used GT4094 that I helped a friend sell you. Some how you started to run your mouth about sled pulling which no one brought up but you. Then you tried to state what you heard from others which was not true. I know who you are speaking of now when you say your friends will not come here... Guess what we have a sign that says we can refuse to help people.... They are on that list.

Obviously you should leave it be and just drop it. You were wrong. Period. Again when you run your mouth about people besides just me and you are wrong you piss others off. Instead of talking negatively on Submans thread you should have just left it alone and went on your pissed off way.

And to further explain why you did not get tech support from me when you bought that turbo, I had 2 trucks in the shop that were getting built. I was the only DMax guy here so I was building both at the same time. They were both spending $20,000 plus and I was not going to tell them sorry that I didn't get your trucks done, I had to walk a guy through installing a PPE 4094 turbo kit. I am again truly sorry for any inconvience that I caused you. I wish that I would have not helped my friend sell it to you. Then maybe you wouldn't think I am a horrible person for not bowing to your every need.

Again Josh what are you doing on here??? This has nothing to do with you.
 

Josh2002cc

That Uncle
Apr 2, 2007
1,832
0
0
39
Kyle, This is what happened... Rob was reading a thread and noticed that you talked negatively about me and then before I could even see it or ask why the thread was closed. No big problem. Rob then asked you to explain what you were talking about and informed me which I sent you a PM. My memory was jogged and I remembered the used GT4094 that I helped a friend sell you. Some how you started to run your mouth about sled pulling which no one brought up but you. Then you tried to state what you heard from others which was not true. I know who you are speaking of now when you say your friends will not come here... Guess what we have a sign that says we can refuse to help people.... They are on that list.

Obviously you should leave it be and just drop it. You were wrong. Period. Again when you run your mouth about people besides just me and you are wrong you piss others off. Instead of talking negatively on Submans thread you should have just left it alone and went on your pissed off way.

And to further explain why you did not get tech support from me when you bought that turbo, I had 2 trucks in the shop that were getting built. I was the only DMax guy here so I was building both at the same time. They were both spending $20,000 plus and I was not going to tell them sorry that I didn't get your trucks done, I had to walk a guy through installing a PPE 4094 turbo kit. I am again truly sorry for any inconvience that I caused you. I wish that I would have not helped my friend sell it to you. Then maybe you wouldn't think I am a horrible person for not bowing to your every need.

Again Josh what are you doing on here??? This has nothing to do with you.

Just like it doesn't have shit to do with Rob but look at what happened when his feelings got hurt. Grow up you bunch of whine buckets.

Also, from a customer service standpoint, I would never tell someone I directly sold or helped sell something to that I am too busy for support becuase I have more important higher paying customers to worry about. If you were so busy that you couldn't help with tech support on installing a 4094 then you had no business trying to help sell the part. Just saying.

BTW, where is my gift for winning the dyno event you put on years back? Did it get lost in the mail?
 

TIMTHECARMAN2004

Block Hole Maker
Sep 23, 2007
300
0
0
Just like it doesn't have shit to do with Rob but look at what happened when his feelings got hurt. Grow up you bunch of whine buckets.

Also, from a customer service standpoint, I would never tell someone I directly sold or helped sell something to that I am too busy for support becuase I have more important higher paying customers to worry about. If you were so busy that you couldn't help with tech support on installing a 4094 then you had no business trying to help sell the part. Just saying.

BTW, where is my gift for winning the dyno event you put on years back? Did it get lost in the mail?

First off, This is me as an individual..... the Dyno event that I put on???? I do not have a dyno. however St. Joseph Diesel does. I am not in charge of any of that. I was just there to help you. SO.......

Secondly, I was telling Kyle why I could not just jump on the phone. Here I will say it in ENGLISH. I was very busy. Sorry I could not help at that time. Is that better???

Josh why must you get your nose into everyones thread on every dang site and mouth them. Most of the time you have not bought anything from them nor have any interest in the company that they represent???

Last I am not whinning, just stating that what was said about me was not deserved and that the other BS that was stated was Lies...

I hope you both have great days.
Let me know if you need any help.
Tim
 

TIMTHECARMAN2004

Block Hole Maker
Sep 23, 2007
300
0
0
Also, you nor Kyle Hurt Robs feelings, he just doesn't put up with anyones BS. What Kyle stated towards Rob was all lies so you mess with the bull you get the horns....

:thumb:
 
Jun 22, 2008
332
0
0
Nebraska
A simple explanation is all it would have taken Tim. I understand money talks and runs SJD. All you needed to do it PM me back and say you were very busy and let me know you'd help me when you had time.
I was wrong to take a stab at Rob but he deserved it for starting a shit thread about me when I made a simple statement. Back in the day we gave people warnings on DP for that shit ;)
I have numerous customers that spend over $20,000 a year with me and one that spends over $50,000 a year. I take care of big paying customers first because it keeps business going strong but I also take care of the guy who spends $300 ;). I don't have many, if any unhappy customers and it's because I take care of them even if it costs me some money to make a deal right with them because I want repeat customers.

The buddy I'm talking about hasn't been in your door ever so he's not on your said list. He's just a farmer that doesn't like your shop rates for injection work ;). He takes his business elsewhere. Just a simple fact of honesty. I'm pretty sure this kid in Ft. Riley doesn't have a ton of money to spend either as they don't have very good money there unless they are higher up ranks ;). Guess it's wrong for me to try to think of how the kid is going to pay his bill after the truck is fixed. I was a poor kid with a D-Max once and I know how hard it was to pay for the first blown headgasket.

Kyle, This is what happened... Rob was reading a thread and noticed that you talked negatively about me and then before I could even see it or ask why the thread was closed. No big problem. Rob then asked you to explain what you were talking about and informed me which I sent you a PM. My memory was jogged and I remembered the used GT4094 that I helped a friend sell you. Some how you started to run your mouth about sled pulling which no one brought up but you. Then you tried to state what you heard from others which was not true. I know who you are speaking of now when you say your friends will not come here... Guess what we have a sign that says we can refuse to help people.... They are on that list.

Obviously you should leave it be and just drop it. You were wrong. Period. Again when you run your mouth about people besides just me and you are wrong you piss others off. Instead of talking negatively on Submans thread you should have just left it alone and went on your pissed off way.

And to further explain why you did not get tech support from me when you bought that turbo, I had 2 trucks in the shop that were getting built. I was the only DMax guy here so I was building both at the same time. They were both spending $20,000 plus and I was not going to tell them sorry that I didn't get your trucks done, I had to walk a guy through installing a PPE 4094 turbo kit. I am again truly sorry for any inconvience that I caused you. I wish that I would have not helped my friend sell it to you. Then maybe you wouldn't think I am a horrible person for not bowing to your every need.

Again Josh what are you doing on here??? This has nothing to do with you.
 

Josh2002cc

That Uncle
Apr 2, 2007
1,832
0
0
39
First off, This is me as an individual..... the Dyno event that I put on???? I do not have a dyno. however St. Joseph Diesel does. I am not in charge of any of that. I was just there to help you. SO.......

Secondly, I was telling Kyle why I could not just jump on the phone. Here I will say it in ENGLISH. I was very busy. Sorry I could not help at that time. Is that better???

Josh why must you get your nose into everyones thread on every dang site and mouth them. Most of the time you have not bought anything from them nor have any interest in the company that they represent???

Last I am not whinning, just stating that what was said about me was not deserved and that the other BS that was stated was Lies...

I hope you both have great days.
Let me know if you need any help.
Tim


Okay, since you want to bring it up I will too.

You quoted me a price on a turbo repair then when it came time to ship it out I get a call from the office lady there and it is magically $300 higher than when you quoted me. Your employer attempted to ass rape me on shipping to the point where I sent you a UPS label at a fraction of the cost. I asked you "WTF" and you played the same card you do here, "well, I just work here" and "I am not a manager" bullshit. If that is the case, we need to get someone on here from SJD that can and WILL make decisions however you are not even a supporting vendor of the site so what is the point.

Just so you know, I sent my concerns to the person who started the thread that was closed down, because if I didn't then I wouldn't be doing a fellow member due service. So, yes I have done business with you or should I say the company that employs you.

I did my business with the OP in private just like Rob should have with Kyle, but he wanted to bring this shit out for everyone to see.
 

MACKIN

Smell My Finger...
Aug 14, 2006
3,948
1
0
Connecticut
Um I have nothing to say other than this thread is useless without pictures and in before the lock. :joker:

Sometimes it's good to get frustration out. Myself I just take a stool softener! :roflmao:
 

TIMTHECARMAN2004

Block Hole Maker
Sep 23, 2007
300
0
0
A simple explanation is all it would have taken Tim. I understand money talks and runs SJD. All you needed to do it PM me back and say you were very busy and let me know you'd help me when you had time.
I was wrong to take a stab at Rob but he deserved it for starting a shit thread about me when I made a simple statement. Back in the day we gave people warnings on DP for that shit ;)
I have numerous customers that spend over $20,000 a year with me and one that spends over $50,000 a year. I take care of big paying customers first because it keeps business going strong but I also take care of the guy who spends $300 ;). I don't have many, if any unhappy customers and it's because I take care of them even if it costs me some money to make a deal right with them because I want repeat customers.

The buddy I'm talking about hasn't been in your door ever so he's not on your said list. He's just a farmer that doesn't like your shop rates for injection work ;). He takes his business elsewhere. Just a simple fact of honesty. I'm pretty sure this kid in Ft. Riley doesn't have a ton of money to spend either as they don't have very good money there unless they are higher up ranks ;). Guess it's wrong for me to try to think of how the kid is going to pay his bill after the truck is fixed. I was a poor kid with a D-Max once and I know how hard it was to pay for the first blown headgasket.

Kyle, I help people everyday that do not spend a dime with SJD. Atleast 30% of my day consists of tech phone calls. The rest is drive in service. I do not mind helping anyone. No matter what shop they go to or who does their work. I am just here to lend a hand. That is what I was trying to do by getting you a turbo and kit for less than what a new one costs. Again sorry for doing that.

Also I don't care what money someone spends here. I will help them even if they do not buy something from SJD. Just like you. However I do have on most days a list of things that I have to have done. Sometimes I may not even get a chance to get on a computer for weeks if not months. So again you calling the shop instead of waiting on a PM would have worked a lot better...
 

TIMTHECARMAN2004

Block Hole Maker
Sep 23, 2007
300
0
0
Okay, since you want to bring it up I will too.

You quoted me a price on a turbo repair then when it came time to ship it out I get a call from the office lady there and it is magically $300 higher than when you quoted me. Your employer attempted to ass rape me on shipping to the point where I sent you a UPS label at a fraction of the cost. I asked you "WTF" and you played the same card you do here, "well, I just work here" and "I am not a manager" bullshit. If that is the case, we need to get someone on here from SJD that can and WILL make decisions however you are not even a supporting vendor of the site so what is the point.

Just so you know, I sent my concerns to the person who started the thread that was closed down, because if I didn't then I wouldn't be doing a fellow member due service. So, yes I have done business with you or should I say the company that employs you.

I did my business with the OP in private just like Rob should have with Kyle, but he wanted to bring this shit out for everyone to see.

What did I bring up???

2 or 3 years ago I slammed my head into a wall for several days. Atleast that is what if felt like. Arguing with you LOL Since then I have decided not to argue with you. Just keep your nose out of others business. That is all.

Thanks
 

TIMTHECARMAN2004

Block Hole Maker
Sep 23, 2007
300
0
0
gt4094.jpg = chapped ass.jpg
Used Turbo = Chapped @$$

Here are the photos of what happened. Again Sorry Kyle...

And the pictures of me talking to Josh2002

:banghead:
 

Attachments

  • gt4094.jpg
    gt4094.jpg
    2.4 KB · Views: 185
  • chapped ass.jpg
    chapped ass.jpg
    71.8 KB · Views: 21

McRat

Diesel Hotrodder
Aug 2, 2006
11,249
26
38
64
Norco CA
www.mcratracing.com
I've been asked to close this thread.

At this point, I'm leaving it open.

Folk, remember that what you read on the Interwebbythingy isn't the final word on anything. Do your own research before selecting a shop, and don't just rely on forum advice alone.
 

TIMTHECARMAN2004

Block Hole Maker
Sep 23, 2007
300
0
0
Josh, I treat everyone that I meet or help with utmost respect. I have no intention to hurt, pissoff, or anger anyone. However there is a saying that you can't please everyone. I try so hard everyday to make that saying a thing of the past, but I just don't have enough time in the day to make it a reality.

Sorry
Tim
 

McRat

Diesel Hotrodder
Aug 2, 2006
11,249
26
38
64
Norco CA
www.mcratracing.com
I will note that the "non-vendors" here cause 10x as many conflicts as the real vendors. This is why we stopped allowing free vendor status. Seems when they have a true commitment to a performance enthusiast forum, they tend to put on their happy face.
 

Rhall

Old Skooler
Aug 12, 2006
2,241
0
36
41
Texas Y'all
:roflmao::roflmao::roflmao: josh. You crack me up. You've started more shit on this site than most, and now your telling people how to do the right thing. Good stuff. I was defending Tim just like ur doing Kyle. Nice try though.
 
Status
Not open for further replies.