Im about to convert my a/c controls, 4wd controls, and headlight control to LED. Just need to know how to take apart the a/c control for a 01-02 truck. Please help!
01-02 A/C control HELP
- Thread starter SparkZ03DMAX
- Start date
It's been awhile since I tore one apart but you just pry up the three knobs then there should be another panel with two little screws. Remove those and then you can access all the lights.
It's been a while since I took mine apart but I used Chanel Locks with electrical tape around the jaws to gently remove the knobs. Then turn the unit over and remove the four screws at each corner. You should be able to remove the face plate and access the PCB. Just be very careful with the PCB. See if this works for ya.
Well talked to the company who sent the kit to me to convert everything to led. well turns out they gave me directions to 03 and up trucks, so i called them and they apologized and offered to install everything for me for free as an apology. So i sent them all the switchs i had and im just gonna have them do the work lol
How exactly were you suppose to put leds in? Were they telling you to solder in new ones? Thats the only i could see you doin it and the way i did mine. Every light in my truck has been converted to a red LED
USSpeedo.
Yeah they require solder in, but their directions on taking apart the switches were for 03 and up trucks, 01-02 switches are completely different (found that out) so thats why they offered to do it for me
Yeah they require solder in, but their directions on taking apart the switches were for 03 and up trucks, 01-02 switches are completely different (found that out) so thats why they offered to do it for me