Search results
-
LLY: Stock turbo 68mm
Im presently running LLY housing ported /polished with 10 blade turbine and billet 6x6 compressor while there is a slight lag on the street when you flat foot the throttle, its not much to speak of, but I built it with the mind set of sled pulling which was why I went with a 6x6 compressor.- j17sims
- Post #19
- Forum: Turbo Talk
-
In need of help with pinion yoke
Any one have a pinion yoke off a classic body style gm that can take a measurement for me. Bought a non balancer 1480 and am having a new shafts built but haven't pulled my old yoke off the rear end. I need to see if they are the same in relation to the placement off the u joint from the rear...- j17sims
- Thread
- Replies: 0
- Forum: Transfer Case / Axles / Driveshafts Tech
-
PO088 code and LOUD injector knock
Thanks ahead of time for the help, This will be the first winter with ATS twin Cp3 and so far not a good one, Ive been getting a PO088 code since it has cooled down well yesterday and today its been down in the high 20s, I went to move the truck to plug it in and same thing code comes up as... -
Van thermostat housing on LBZ
What's everyone doing on an lbz to clear the fan shroud? -
LBZ: LBZ white smoke rough idle
I got a single from not so local dealer and hour away with a discount since the computers went down when he was looking bin location up and I had to wait an hour for them to find location, but hey saved me money in the long run. Anyways installed injector started up no knock but very clattery... -
LBZ: LBZ white smoke rough idle
ok update smoke is no more but developed a knock to it determined knock from drivers side. Pulled connector on number 2 cyl. and started no knock just a miss. pulled #2 and 4 inspected and all good on tips, sent out and had injectors tested just picked up and cyl 2 was over fueling and 4 under... -
LBZ: LBZ white smoke rough idle
Egr is deleted and I have not checked rail pressures yet but disired is 5900 if I remember right on the tune I was in when this happened I dropped it down to my "stock" tunes which I believe was 5200. I have not commanded max rail not even sure how I can if it can be done with a v2 I'm unaware... -
LBZ: LBZ white smoke rough idle
Coolant level is spot on and upper radiator hose was not hard felt normal as before this. -
-
LBZ: LBZ white smoke rough idle
Need a little help I was Hauling cattle coming back empty pulling a hill and felt a shutter and pedal went dead looked in the Mirror and was pouring I Mean POURING white smoke it whited out the road, got pulled over and it engulfed the truck in smoke in which I could tell it was fuel. Towed it... -
How big of injectors can I run with out loosing tow ability
Thank I haven't had any injectors in a duramax yet and I didn't want it slobbering and hasing white. I've had that before I don't want that -
How big of injectors can I run with out loosing tow ability
I pull work stock now and use it the to tow. I threw in daily drive but if it running it's headed to a track or towing. But plans change later and I just don't wanna put 45over and later go "I should have done 60 or 100 overs " In the future I will probably build the engine maybe in the near... -
How big of injectors can I run with out loosing tow ability
I'm installing dual fuelers due to draining the rail on my two performance tunes, so I also want to step up in injectors size too be able to drop pulse width. BUT I do not want to loose drive ability or most important tow ability. What's the biggest can I go and still keep that. Stock charger...