Search results

Search the forum Search Articles
  1. motoxdad

    EFILive April 20, 2013 EFILive Public Release Software

    Hey Cindy, so this release does not have the dpf/egr restrictions? thank you
  2. motoxdad

    less than a month to race day

    I bet you are going to need crowd control when the Hell Camino hits the track
  3. motoxdad

    2007 Gmc 2500hd

    motoxdad submitted a new Showcase Item: 2007 Gmc 2500hd Read more about this showcase item here...
  4. 2007 Gmc 2500hd

    2007 Gmc 2500hd

    ppe stage 5 trans with all the ppe goodies, raptor lift pump with nicktane filtration supplied by our new sump, ppe intercooler & hoses, ppe race manifolds & up pipes, no egr, 5" mbrp exhaust, snow stage 3 meth, edge cts gauge pak, ppe sleaves, centerlink & braces, mpi twins & efi live tuned by rob
  5. motoxdad

    Allison 6sp: 06 lbz, code 2761

    Hello i installed a PPE Stage 5 kit in a 06lbz & used the PPE pressure spring instead of the shim. new PPE trans cooler & new trans lines, everything went together great, but I have set a code of 2761 & the truck will not move. the fluid level is in the cold cross hatches. any ideas?
  6. motoxdad

    LBZ: PO 776 with stage 5 install

    The valve body is headed your way, it should be there on thursday, Mike, thank you
  7. motoxdad

    LBZ: PO 776 with stage 5 install

    Mike the C3 apply piston does not look like it is tore, it does look to have some very small chunks missing on the outside lip that goes down in the case, and it looks like the machined side of the piston has missing a small amount of missing material as well, I will get the C4 out in a few...
  8. motoxdad

    LBZ: PO 776 with stage 5 install

    thank you, i will take some pics of how tight it is, and what it takes to get it out
  9. motoxdad

    LBZ: PO 776 with stage 5 install

    I have not put the valve body back in to try, I was not comfortable with just cleaning up the valve body. the amount of force I had to use to install the C3 apply piston was an amount I have never used, I would be shocked if I did not tear it, but ppe's response led me to believe that I was...
  10. motoxdad

    LBZ: PO 776 with stage 5 install

    :confused:looking for suggestions, I put a ppe stage 5 kit in a friend of mines lbz. everything went together smooth except for the C3 apply piston, it took a tremendous amount of force to install it, but a ppe assured me not to worry. after filling up with fluid and re-checking after the truck...
Top Bottom