Search results
-
P
LMM: LMM Falls on its face, then comes back when I let off and get back into it
Mine would do the same, I installed the race plug on my 02 and fixed the issue. Granted i already had the lift pump and was running a higher tune than you are. -
P
LMM: Truck stuck in Limp mode P0299 & P2510
I can't seem to find the desired vein postion gauge on my cts. Is the only on the new cts? i can hear the veins cycle from the exhast but its not doing it like it used to, seems really short and quick. I took the vein sensor out and cleaned it, was some gunk on it but not much. The only other... -
P
LMM: Truck stuck in Limp mode P0299 & P2510
Sorry im new to this, how would i check that? Here are some readings i got on idle off my cts insight Baro 14.5 PSI DPF SOOT 21 PSI DPFPV 3.8 PSI FRP 4.3 PSI MAP 14 PSI MAF 38 TO 40 PSI VPOS 10% I eliminated the airdog and connected the 2 hoses together to see if that would fix it and it... -
P
LMM: Truck stuck in Limp mode P0299 & P2510
From what i can tell yes. how can i really check it? Took it for another spin this morning and got the p0299 code again. Truck seems to rattle when i get into it then i get the code. Im starting to think maybe the pump is bad?:mad: I double checked the airdog. From the take it goes to the the... -
P
LMM: Truck stuck in Limp mode P0299 & P2510
Cleaned out old MAP sensor and replaced it with new one i got from the dealer and seems to be running better. showing boost now but egts are still high and truck still fills sluggish. Got P0299 again on test run. Is there anything else im missing that i should be checking? -
P
LMM: Truck stuck in Limp mode P0299 & P2510
Hello everyone, i have a 07.5 RCLB duramax thats trying to get me to pull me hair out. I recently (2 weeks ago) had Mike L do my trans and then had Idaho rob up my tunes. Everything has been running smooth as of yesterday. I installed the airdog 2, everything went smooth. Took truck for a spin...