Search results

  1. P

    04 6.0 to lb7 swap problem class 2 data

    So ive swaped a lb7 in a 04 2500 hd Finnaly figured out my shift problem [ shift solenoids) The only problem i have left is efi live wont read live data or tune it will give me trouble codes and conect that much. But data also cuts out as far as shift selector Ive taken voltage readings at the...
  2. P

    04 6.0 to lb7 swap problem.. help

    Alright have the truck running no security isues or starting issues but the problem with the trans continues no trans temp gear indicator and stuck in 3rd ... switched c100 plug yellow wire. Getting power to pin 4 ground to pin1 but my tcm has no wire in pin 2 scematics say pink power to pin 2...
  3. P

    04 6.0 to lb7 swap problem.. help

    Well may have the trans issue figured out as the truck at the end today acted like it was in nutral even though it was in drive i thought it was something else the nsbu switch is what i think it is.... now the donor truck had a cab fire ... Nothing looked wrong with the fuse box but could that...
  4. P

    04 6.0 to lb7 swap problem.. help

    Ok i got the relearn done and the eng starred, but the trans still is in limp and has a p0700 code. you can only reset with a scanner right ? So i shut it off started it back off turned headlight swith and it wouldnt start .disconected batt and it started it did this twice. Now the ing switch...
  5. P

    04 6.0 to lb7 swap problem.. help

    Well i changed out fuse box. fixed vats i think security light comes on 3 sec with ignition but dosent blink anymore when cranking .. starts for 2 seconds and shuts off ?
  6. P

    04 6.0 to lb7 swap problem.. help

    Thanks i will try that. Thanks for the suggestion
  7. P

    04 6.0 to lb7 swap problem.. help

    Ok first off i picked up a 04 lb7 truck with a burnt out cab for dirt cheap so i searched and found a 04 6.0 gasser with a rust free body with motor and trans problems i drove neither of the vehichles so i had no posative knowledge that either truck was like.. so i pulled the engine and hooked...