Search results

Search the forum Search Articles
  1. A

    LML Hypothetically speaking.....

    I left the pressure sensor plugged into the wiring harness, but disconnected the two pressure sensing hoses, and taped them shut. I now get 700 miles between regens, as you described. It also stopped the annoying quick soot count up to 15 grams or so after a regen The funny thing is its...
  2. A

    Allison 5sp: Transfer case leak

    Most folks buy another GM ( zinc pot metal) housing, and put a pump rub kit in it. The better solution is to buy a aftermarket aluminum housing, that doesnt need a pump rub kit. https://www.amazon.com/Dorman-917-561-Transfer-Case-Housing/dp/B00BJ4EFXE Just make sure you order the...
  3. A

    RT™ A11-PR Spring Kit

    I spoke to Mike, and while this is a great kit, the trans does have to be out of the vehicle, as some of the goodies install with the pump removed. Thanks for your time Mike.
  4. A

    RT™ A11-PR Spring Kit

    Will do. Thanks Mike.
  5. A

    RT™ A11-PR Spring Kit

    Hi Mike, I just became aware of the RT A11-PR spring kit, from Ratiotek. How hard is it to install? Is there any downside to it? I have a 2011 LML with 75k miles, and its tuned up aprox +100hp. I'm servicing the trans next weekend, and thought it would be a good time to toss this kit...
  6. A

    Got my trans built but shifts extremely hard

    Someone needs to weld both your toolbox and wallet shut....
  7. A

    Got my trans built but shifts extremely hard

    Post... of the year. :thumb:
  8. A

    LML ticking after oil change

    Duramax's are the most tolerant diesels I know if... they'd run on friggin' Wesson oil.. its that all you had. Name ONE truck that ever had a lubrication issue on Rotella? :screwy::screwy::screwy:
  9. A

    Transfer case problem need suggestions please

    http://www.craftsman.com/craftsman-10-pc-damaged-bolt-nut-remover-set-low/p-00952166000P These things are lifesavers.....
  10. A

    LML Kennedy Pump Install on a LML

    I wanted a few things from my lift pump install.... 1. Easily reversible 2. Quiet 3. Long lasting 4. Good ground clearance 5. Increased filtration and here's how I did it. Starting at the rear, you have to disconnect the stock line. I stuck a small camera up above the tank and took a photo...
  11. A

    LLY: My first oil change in the lly

    I also run the Mystic in my 250k mile LLY https://www.mystiklubes.com/do/product/CAR_SUV_VAN_LT_TRUCK/663004002 Helped the oil pressure when hot and towing, engine is quieter too. Mobil 1 in my LML.
  12. A

    LMM transfer case question

    Mike and his crew just swapped my pump rubbed mag housing, for the aftermarket aluminum one. The repair was performed perfectly.
Top Bottom