Search results

Search the forum Search Articles
  1. oscyjack

    Trans mount - MikeL/Evan preferred?

    lmao. archaic rubber mount it is then.
  2. oscyjack

    Trans mount - MikeL/Evan preferred?

    Got a rush order on the stock mount, thanks again Evan and Mike and everyone for helping
  3. oscyjack

    Trans mount - MikeL/Evan preferred?

    Thats what it is then :). I had read lots of back and forth as to whether or not the poly is good, or works with regular engine mounts etc. Since Evan is going to do the trans when the time comes, I figured I should ask him and Mike what their preference is since they deal with these every day...
  4. oscyjack

    Trans mount - MikeL/Evan preferred?

    https://www.merchant-automotive.com/p-1591-polyurethene-transmission-mount-lb7-lly-lbz-lmm-2001-2010.aspx
  5. oscyjack

    Trans mount - MikeL/Evan preferred?

    Would this be the correct part number? GM 15113135
  6. oscyjack

    Trans mount - MikeL/Evan preferred?

    Thanks boys. Should have looked before I leaped, hopefully Merchant hasn't shipped out yet and I can swap the order.
  7. oscyjack

    Trans mount - MikeL/Evan preferred?

    I'm in the process of setting up a time with Evan for my trans build at the end of the summer/beginning of fall. I've been getting some really insane vibrations that I couldn't track down. Realized yesterday that my trans mount is allowing movement in all directions when I used the output shaft...
  8. oscyjack

    UCA/alignment problem -> Zone UCA the answer?

    A few months back I built my front end. For the UCA, I chose to go with Moog problem solvers with offset bushings for added camber adjustment. I personally can not align a vehicle, never done it. But I did do the parts install, and it went smoothly. So, the whole front end is new including...
  9. oscyjack

    Quick question about different EGR delete method

    That's what I ordered, but since I could only use one of the pieces it didnt seem worth it. im on tune 1 til I build the trans haha
  10. oscyjack

    Quick question about different EGR delete method

    Sorry. I have an EGR delete ready to install. I found a boost leak at the passenger intercooler boot. So, I bought the mishimoto 3.5" outlet duct replacement which is 3.5"OD, thinking to use it with my EGR delete for extra flow. But, I didn't realize the EGR delete tube is connected directly to...
  11. oscyjack

    Quick question about different EGR delete method

    So This weekend I am hoping to get my EGR delete installed. I discovered a boost leak at the cold side boot, so I had to order a new one. While searching through options, I came across the mishimoto 3.5" cold side tube kit, and bought it thinking my EGR delete would work with as it keep stock...
  12. oscyjack

    Not stuck yet, but close. In Norfolk

    I'm on cape cod. I'll take you up on that someday for sure, throw a few back while we're at it. I did my joints 6 weeks ago on the lift at work, but didn't help the damn squeak. I'm gonna pop the rear cover off for a look and take the rear axle down to the seals to check things out.
  13. oscyjack

    Not stuck yet, but close. In Norfolk

    Glad to hear it. Now i'll really have to tack down my squeak haha
  14. oscyjack

    Not stuck yet, but close. In Norfolk

    Roger, thanks for the info. Did it cure the squeak?
  15. oscyjack

    Not stuck yet, but close. In Norfolk

    Not questioning your choices, just trying to get more understanding of specifics when it comes to components. I like to know as much as possible about this stuff. Why is it the 1480 is stronger? I too went with the 1480 (Moog) but only because it was the part number associated with the truck...
  16. oscyjack

    Not stuck yet, but close. In Norfolk

    I guess I now don't understand. The OEM part is the 1485, but you felt the 1480 was a better choice because it is stronger? If it does not fit without modification, is it really stronger? I'm trying to determine, if while under the truck next week amidst EGR delete, up pipe, downpipe, hot side...
  17. oscyjack

    Not stuck yet, but close. In Norfolk

    So would you think purchasing the OEM 1485 would require no modifications?
  18. oscyjack

    LMM: What sounds systems is everyone running?

    you could really attach any speaker if you wire it in. The impedance is slightly different but still workable. Unless you have failing speakers, you'll get the best performance from the OEM bose until you're ready to remove it.
  19. oscyjack

    Not stuck yet, but close. In Norfolk

    The new u-joint is larger? Which did you buy? I don't think i'm having the same issue, because it made the squeak with OEM U-joints and with the new grease-able moogs
  20. oscyjack

    LMM: What sounds systems is everyone running?

    The bose is wired differently, and dependent on year uses the mos transmission system. When doing aftermarket speakers, it's best to route around the bose and remove OEM stuff where appropriate. The bose isn't that much better than the regular OEM system, it really just has sub channel which...
Top Bottom