Search results

Search the forum Search Articles
  1. S

    Question: S475 specs for twin over IHI

    Will do thanks :thumb: Spin it over by hand or can I use the starter?
  2. S

    Question: S475 specs for twin over IHI

    Balance rates about 3 weeks ago -1.0 -2.8 1.2 2.9 1.0 .9 2.0 -3.7 Rail pressure was around 6k at idle when first started last time I checked. It still has an intake heater and I put new glow plugs in it 3 weeks ago. I guess I need to make sure they working. I have 2 lb7s and I...
  3. S

    Question: S475 specs for twin over IHI

    Yep. Also does it on all of my dps5 tunes and when it had a ppe in it. The truck still made 515hp like this so that's another thing that's got me wondering. The colder it gets the worse it gets. It's gonna be about 0* tomorrow so it should be pretty fun
  4. S

    Question: S475 specs for twin over IHI

    On cold starts she cranks over 2-3 times longer than normal, blows nasty white raw fuel smoke out of the exhaust, misfires really bad. This all pretty much goes away after the engine warms up but when warm if I hold it at anything over 1800rpm in neutral it shakes real bad. I'm going to do a...
  5. S

    Question: S475 specs for twin over IHI

    I'm up in the air on what i want to run for a turbo setup on my dd. I have to figure out what's going on with my motor first. If it has internal engine problems I will build the motor some and run twins or a decent sized single. If its not internal engine issues I'll just keep it stock and built...
  6. S

    Question: S475 specs for twin over IHI

    Thanks trent I'll see if I can find a # on it. I dont know for sure on the specs because it came on a truck I bought and that's what I was told the specs were.
  7. S

    Question: S475 specs for twin over IHI

    I have an S475 sitting around and I'm wondering if it's ok to use it in a stock twin setup. If its a good one to use I'd probably see if I could buy the kit minus turbo from Trent. Turbo specs S475 T6 1.32 a/r 83mm turbine
  8. S

    "Nightmare" season review

    Sweet looking truck :thumb:
  9. S

    Beer of the nite

    Are you sure you weren't drinking a 40% over mixed drink straight out of customs from Cat and Bosch?? :roflmao: :roflmao:
  10. S

    CT DURAMAX's were are you!!

    Yeah but Ben doesn't like to answer his phone or respond to pm's
  11. S

    CT DURAMAX's were are you!!

    I haven't really looked into machine shops around here yet. I'd like to find one that has experience with these motors though. You can borrow the tester no problem.
  12. S

    CT DURAMAX's were are you!!

    Yeah I thought about doing that. The engine in the puller only has 80k on it but it builds pressure in the cooling sys pretty fast so it might have a bad head gasket.
  13. S

    CT DURAMAX's were are you!!

    I'm still waiting for my Duramax compression tester adaptor to come in. I have a feeling it's gonna be bad news and I'll have to put all the motor parts I have for my puller into my daily driver. :(
  14. S

    CT DURAMAX's were are you!!

    The more I drink the more I drink
  15. S

    new cadilac duramax. 410hp 810tq video inside

    Maybe they are a sponsor of the escalade dually Duramax :roflmao:
  16. S

    new cadilac duramax. 410hp 810tq video inside

    No way this is real. At least I hope
  17. S

    CT DURAMAX's were are you!!

    The only thing that sucks about Jannetys is that Ted won't allow a truck with stacks to run on his dyno. I've asked him a million times to dyno either of my trucks one has a hood stack the other has a stack in the bed. He says it's not worth getting his shop all dirty. Why doesn't he just put an...
  18. S

    What Where They Thinking?

    Imagine snagging that pos on a parked car???? :roflmao: :roflmao:
  19. S

    bml2200's Engine Build Thread

    Taylorbok Diesel pistons will melt also
  20. S

    New Duramax?

    She's a 6 lug. Looks a lot like the gmc concept
Top Bottom