Search results

  1. SoCalMike

    LBZ: Trans build prep

    My trans is doing the same as yours DaJokr. I have not limped it yet but i get the tc shudder when i roll on the throttle hard in 5th /6th. Fortunately i am in cali close to Mike's shop. i will be calling Mike very soon to schedule an appointment to have the trans built.:woott:
  2. SoCalMike

    New from SoCal

    Welcome!
  3. SoCalMike

    EFILive Gas tuners

    i had wheatly tuning and liked it. but he uses hp tuners
  4. SoCalMike

    Happy Birthday McRat, Bonestock &dracing70

    Happy birthday!
  5. SoCalMike

    Front end rebuild

    this is what i did to get the pitman arm off. the bolt is a 5/8 x 18 x 2 grade 8 bolt and it fits in there with out taking anything apart. my pitman arm slid right off.
  6. SoCalMike

    Front end rebuild

    I got cognito uca's, cognito braces, moog lower ball joints, oem pitman and idler arms with oem idler support, rare parts hd tie rods, and bilstien shocks all around. did it all about 3 weeks ago. i have been hearing/reading about moog arm snapping so i went with oem for the pitman and idler...
  7. SoCalMike

    Middle tire wear

    i used to run the same psi when i had the same tire size and pyo's also. 55 front 45 rear
  8. SoCalMike

    Middle tire wear

    About 45 psi rear. 55 front. that is what i run in mine. 285/70/17's
  9. SoCalMike

    Best ball joint puller

    When i did my lowers i rented one from the auto parts store. it did the job but if i were to buy a ball joint press i would get the right adapter for the lowers. i damaged the cup from the rented one. This is the adapter i think you need for the lca ball joint.
  10. SoCalMike

    Pix request, show me your steps

    westin 4 inch oval
  11. SoCalMike

    LBZ: Magnaflow Downpipe

    its not that bad. about half a day for your first time. ( 4hrs) this is how i did it. First i started at the top. I took the turbo heat shield bolts out (3 bolts on top)and rolled it to the back. there was no way to get the the band clamp so i removed the glow plug controller. once that was...
  12. SoCalMike

    LBZ: Magnaflow Downpipe

    This is true......
  13. SoCalMike

    LBZ: Magnaflow Downpipe

    Took me about 4 hrs. i was taking my time.
  14. SoCalMike

    LBZ: Magnaflow Downpipe

    you might need to massage the trans dipstick. but thats about it.
  15. SoCalMike

    LBZ: Magnaflow Downpipe

    I have the magnaflow downpipe. fit great!
  16. SoCalMike

    STill visiting in so cal

    Gaslamp in downtown san diego
  17. SoCalMike

    STill visiting in so cal

    go visit mike.:thumb: