Search results

Search the forum Search Articles
  1. J

    Help: Brake bleeding problem

    Just to post result. Ended up being a bad ABS module. Would not let fluid through to LF brake. Replaced module and all is good :thumb:
  2. J

    Trying to Learn

    Cool. Thanks for the input. I thought that tiny tune was pretty awesome when I first got it, but now that I have a trans that will take more, it seems pretty lame. Fuel makes sense. I did notice it seems to be worse if I'm pulling a big hill, better on flat going. Guess I better get the...
  3. J

    Trying to Learn

    I will get bigger tuning as time and $$ allows. It is ATP EFI tuning that I have now. I did not port the fuel rail, haven't heard of that mod before. I'll look into that. Down pipe is an aftermarket no-name brand and it is 2-1/2" round. Trans is built, so that's all set. EGT's...
  4. J

    Trying to Learn

    OK I've done a lot of searching, but can't find anything relating to my question. I replaced my stock IHI with a DTS 64mm turbo. Also put on a AD 150, profab intake horn and got rid of my EGR and put in a federal pass up pipe and y-bridge. Already had ARE intake, 2-1/2" down pipe, 4" straight...
  5. J

    Help: Brake bleeding problem

    Sorry about that. It's an 03 ECSB 2500hd. So I worked on it some more today, pulled off the LF brake line and the MC line from the ABS module, blew a little air backwards through the module (lightly) to make sure it wasn't clogged, blew right through. Tried bleeding that wheel again, and no...
  6. J

    Help: Brake bleeding problem

    Blew a brake line the other day, no big deal. By the time I was done, ended up replacing 3 old rusty lines. Line from rear port on master cylinder to ABS module, and both front wheel lines to ABS module. When I went to bleed the front brakes, right side bled perfect, left side has no fluid at...
Top Bottom