Search results

Search the forum Search Articles
  1. gmduramax

    Grand Tracker continual build

    I thought that was rule number 2 forget how long it’s been sitting Rule number 1 don’t add up the parts list cost 🤣
  2. gmduramax

    Chevy1925 (James) Truck/motor build

    You should be seeing that gauge shortly
  3. gmduramax

    Tire size for street/strip

    I went with DJM lower arms. It does narrow the front end some. I kinda want to go back to stock lower control arms and do spindles but I’m worried I won’t get the alignment where I want it. I like to run -1 camber and 4.8 caster. I just moved my factory hangers up so I can use Caltracs. If I...
  4. gmduramax

    Who makes GM brakes?

    Down shift for street driving 🤣
  5. gmduramax

    Who makes GM brakes?

    Response time and the ABS ability to cycle faster will make a huge difference in stopping ability. I find that the brakes are good enough to lock up factory tires but everywhere else they aren’t that good. If at minimum run Castrol SRF fluid, flush the entire system and ABS will work 5 times better
  6. gmduramax

    Who makes GM brakes?

    I would never run anything factory. Stop tech slotted rotors, and EBC pads only for our trucks. Do factory parts stop the trucks, sure. Don’t forget the good brake fluid. Being able to stop 5’ sooner could be the difference from dying and living in an accident, especially since factory parts...
  7. gmduramax

    Need some opinions on 2010 LMM build

    100% worth doing, you’ll get better spool out of the 65
  8. gmduramax

    Tire size for street/strip

    What’s your caster set at?
  9. gmduramax

    Tire size for street/strip

    Are your front tires poking out the fenders? I have 305/50/20 NorCal fender mod. I am running djm lowering lower control arms and that brought the tires in a bit, I have zero rubbing
  10. gmduramax

    Need some opinions on 2010 LMM build

    LBZ are 7 hole LMM are 6 hole. If I remember correctly LBZ flow slightly more than LMM and atomize the fuel better.
  11. gmduramax

    Need some opinions on 2010 LMM build

    100% LBZ injectors for 800hp 150% for 1000hp Get an S480 I like the simplicity of a single 12mm but nothing wrong with two stocks
  12. gmduramax

    Grand Tracker continual build

    I think it’s time for a YouTube channel 😍
  13. gmduramax

    Issues after deleting my LML

    You aren’t going to get any help with a deleted truck. I would bet it’s the tune.
  14. gmduramax

    Chevy1925 (James) Truck/motor build

    You want the big tune 🤣
  15. gmduramax

    May '24 Chat -- MayDay, a holiday or a cry for help?

    I’m used to them only lasting a year so I thought I was saving money 🤣
  16. gmduramax

    May '24 Chat -- MayDay, a holiday or a cry for help?

    Don’t say that 🤣 technically it’s 2 years overdue.
  17. gmduramax

    Another reason not to get involved....

    I just use the Robokiller app. Screens my calls before my phone rings and if it’s a known spam call the app will answer and talk to them wasting their time.
  18. gmduramax

    Brake issue

    Sounds like they need to splurge for Castrol SRF fluid and better pads
  19. gmduramax

    Built motor oil

    Ran rotella 15/40 conventional. Would change it every 5k, sooner depending how many passes I put on it. Stock oil pump. I have about 135k on HX bearings. I wanna say 20ish psi at idle 77psi WOT
  20. gmduramax

    Valley Charger

    I have a IHI ported and polished with an 83 over it. In my opinion it works okay. I would really like the IHI to have a little more turbine flow. I was looking into the gen 2 RDS drop in supercore. Not 100% sure but does a 10 blade wheel flow more than the factory 11? The gen 2 dropped weight on...
Top Bottom