Search results
-
LBZ tips in LMM bodies?
How many of you or a better question who is running LBZ tips in LMM bodied injectors? I am getting ready to send my injectors in from my lmm to Exergy and have them cleaned, calibrated and tested. Also thinking about having them 30% extrude honed to keep pulse down. They will be stock cp3 and... -
Back to Stock
Injectors I am undecided on what to do with the injectors. I have them out and they currently have 80% tips on them but I will be removing them tommorrow and installing stock lbz tips. I am curious as if I should send them into a fuel shop and have them all tested and possibly go 30% with them... -
New Vendor Sale - Turbos, Porting/Polishing, Fabrication
Sounds good give me a shout anytime you are available. 307-431-2482 Thanks.:thumb:- Bonestock
- Post #20
- Forum: Axis Design & Fabrication - Owner: Russell Satrom
-
New Vendor Sale - Turbos, Porting/Polishing, Fabrication
LMM Charger Do you have any special wheels for stock LMM Charger? How to get 30 or more hp out of my stock charger? lol. My cell is 307-431-2482 can talk or text if you are available. Thanks, Randy.- Bonestock
- Post #18
- Forum: Axis Design & Fabrication - Owner: Russell Satrom
-
Back to Stock
Hard Parts Sounds good on the wheel.. I have a few more items I need to track down if any members or vendors on here might have.... 2007 GMC 2500hd All of the turbo coolant lines and fittings. all of the turbo supply and drain lines and fittings. I also need a plug and washer for... -
Back to Stock
Ya, dont need the kit just the pipe from the intercooler to the y bridge. I had compounds and egr cooler is long gone! -
Back to Stock
LBZ Nozzles on Lmm Sticks. Ok so I picked up a set of LBZ nozzles to throw on the lmm injectors. I called up Industrial injection and asked them about testing and calibrating the injectors. They asked me why I am going to put lbz nozzles on lmm sticks. They said they do not recommend this that... -
Back to Stock
What wheel? Who sells one on here? If there is a notable gain that is worth while with stock charger I am in. -
-
Back to Stock
Batmo Also is it worth it while my stock charger is out to install a different wheel? -
Back to Stock
Well I sold the compounds off my LMM. I am thinking of going back to stock or maybe a fleece 63. I am looking for the following parts: LMM Turbo mouthpiece and clamp. EGR delete pipe from CAI to Y bridge. Thermostat piping. Intercooler piping both sides with boots and clamps. Fender... -
-
New track times!!
Great job Mike! You bested me by a tenth. I guess its time for dual c'$!- Bonestock
- Post #155
- Forum: Drag Racing
-
-
New track times!!
Nice work! Nobody likes cowards! Let the dog eat! Jake has been running dual c's for quite awhile and his truck runs great! Not sure how long any of ours will run on stock rods but so far so good! Good luck @ the dyno!- Bonestock
- Post #84
- Forum: Drag Racing
-
Comp Turbo and my horrible experience...
I have a buddy who exploded a comp turbo on a dyno run. He definetly overan the charger with nos and no gate . How has everyone elses luck been with these chargers? These are supposed to be a low cost alternative ball bearing turbo right?- Bonestock
- Post #10
- Forum: Smoke Signals
-
The truck that could.
Well kind of a sad day. I sold the Lb7 to a friend. I had alot of good times and fun with the little truck that could. Lol. Who else is missing their lb7?- Bonestock
- Thread
- Replies: 3
- Forum: Smoke Signals
-
1st and 2nd gear delete
Listen to the Mafia! I run the same 4500 never a problem.- Bonestock
- Post #24
- Forum: Sled Pulling
-