Search results
-
How long would you run these injectors?
That was exactly the part that fell out... what is it? -
How long would you run these injectors?
Okay that makes sense. the weird thing is when I took the sending unit out I plugged it back in out of the tank and had a buddy play around with the arm while I looked at Measured/Reported Fuel Levels on the Tech 2 it seemed inconsistent on the low end, but I was able to get the dash light to... -
How long would you run these injectors?
Also, I think I know at least part of the reason my injectors haven’t lived a happy life... Also found a piece had fallen out of the bottom of the old sending unit and was laying on the bottom of the tank. -
How long would you run these injectors?
I got this off the site you linked @DAVe3283 and I found a list of ECM info that matched the Part Number part of the list but couldn’t find the CVN info which I assume is the OS calibration? -
HVAC system stuck on heater
Oh cool! I didn't know about that, looks pretty reasonable @ $40/24mo -
HVAC system stuck on heater
Since my fix it has been problem free... up until yesterday. I ran out of fuel in the 100* heat and after putting in 5 gallons I had to prime 3 times (stalled out 3 times) until all the air was out. When I got it running the last and final time, it was stuck on heat. Last thing i needed after... -
How long would you run these injectors?
Interesting, any way to check what OS is on it with a Tech 2? -
How long would you run these injectors?
Thanks, although I should clarify the scale is off and it’s actually an empty tank at around 1/4 left pushed it one day and dash said 40 miles left and about 1/8 tank, light wasn’t on yet. Decided to fill up and got 25.75 gallons into it. I’m pretty sure CCSB still has a 26 gallon tank. I know... -
How long would you run these injectors?
So... just ran out of fuel for the first time. I forgot the previous owner told me the sending unit is wrong and he’s run out around 1/4 tank twice. is the sending unit physically bad and need to be replaced or is it a software thing? -
LB7: 02 LB7 Audio Overhaul
Double Din in an 01/02 fits weird, and you'll either need to trim the dash and make a little gap covering piece, or I think there's a high dollar new dash facia that you can use.- fl0w3n
- Post #74
- Forum: Stereo & Electronics
-
LB7: 02 LB7 Audio Overhaul
Got it, I just enjoy super loud and clear sound with tight bass. I'm even less versed than you, but my local brick and mortar shop that's been around for 41+ years pretty much default advises me to go with CDT components and Memphis subs and sometimes Memphis amps for the few builds me and my...- fl0w3n
- Post #66
- Forum: Stereo & Electronics
-
LB7: 02 LB7 Audio Overhaul
Do you have any thoughts on the Memphis MJM644 or MJM622? What else would you look into for replacing those if it were needed?- fl0w3n
- Post #64
- Forum: Stereo & Electronics
-
LB7: 02 LB7 Audio Overhaul
Nice. Curious why the design frequency deviates from the posted chart on your subs? I would also be curious to hear the difference between sealed "Clean Response" and "Increased Bass" both coming from a 6.5"...- fl0w3n
- Post #62
- Forum: Stereo & Electronics
-
LB7: 02 LB7 Audio Overhaul
Nice! Is he building it for you, or did he just design it for your use? Is there any internal baffling? If it's meant for you to build on your own, isn't it missing the dimensions on the face of the box?- fl0w3n
- Post #60
- Forum: Stereo & Electronics
-
LB7: 02 LB7 Audio Overhaul
Any updates? Just swapped my fronts from the Kicker co-ax's that the truck came with to my CDT ES Gold's and dang what a difference, even without an amp. So I'm excited about audio right now. Really curious to see how the box turns out, especially if you're able to share it afterwards.- fl0w3n
- Post #48
- Forum: Stereo & Electronics
-
Who’s running 35s?
I ran 35's on my LBZ ECSB with Rob tunes and couldn't resist keeping my foot out of it at least once a tank, and I usually averaged 16-18 hand calc'd- fl0w3n
- Post #17
- Forum: Wheels & Tires
-
Questions regarding SAC injectors
got it, that’s what I thought I remember the smog tech at the time saying about the Information it was looking for being in a different location or something. That’s good news. -
Questions regarding SAC injectors
I hadn’t considered that... In California when they hook up to OBD2 it won’t let test complete if it’s tuned, it just hangs up like the test machine is malfunctioning. doesn’t matter “who” is running the test. Had issues selling my LBZ back in 2017 or so. Had to get it flashed to stock at the... -
How long would you run these injectors?
Bold pretty much confirms what I was thinking, for about double $$ the basic 2.0 smooth bodies I get the LSC 2.0's, but if they're only "good" for a few minutes in the rough stuff it doesn't really seem worth it over the 2.0 smooth bodies right now. Sure I could probably tune them for smoother... -
How long would you run these injectors?
This thread is kinda becoming my dumping place for questions about this truck... maybe once I actually collect some parts I'll make a "build" thread I think this question is mostly for @Chevy1925 because I'm curious about spring rates on the torsion setup and shock choices, and you seem pretty...