Search results

Search the forum Search Articles
  1. prostreeter600

    603 Diesels Friday Night

    Let it eat !!!! Better on trans if you use the lockup when hammering on it .
  2. prostreeter600

    1/4 mile discussion and time slips post here!

    Tom as you can see from my post I said A bit late for that Lol
  3. prostreeter600

    1/4 mile discussion and time slips post here!

    Nobody said it matters . It's for informational reasons , to where we know how others got there , to learn from others expierences , for comparison, for the same reason we're asked to provide what the vehicle weighs , what transmission we're running etc etc . For instance the top of the list...
  4. prostreeter600

    1/4 mile discussion and time slips post here!

    It would be nice to know who used NOS to run their numbers . Whether it was used for spool up or all the way thru . It's a bit late for that though Lol :D
  5. prostreeter600

    Will 60' improve with 3.42s

    Mark all my common sense tells me the truck should 60' better , MPH higher and lower the ET just because of the power and torque my setup is making . Hopefully my common sense is spot on . Gears will be in in the next month then it's off to the races
  6. prostreeter600

    Will 60' improve with 3.42s

    I'm at about 4200 crossing the finish line with the 3.73s and 30" tall DRs , keep in mind that was in tune 4 . I haven't had the truck on a dyno so I don't know where peak power is . It comes alive right away and pulls super hard all the way thru . Even when I leave under desired Boost/RPM it...
  7. prostreeter600

    Will 60' improve with 3.42s

    I guess I missed the 148---153
  8. prostreeter600

    Will 60' improve with 3.42s

    Yea near impossible to tell when you changed turbo setups and gears at all the same time . I'm planning on doing 3.42s everything else is staying the same with exception to a large Derale tranny cooler with fan . I'm guessing your MPH definitely picked up with that much difference in ET .
  9. prostreeter600

    Will 60' improve with 3.42s

    Good to know . Did your MPH and ET improve ?
  10. prostreeter600

    Will 60' improve with 3.42s

    I halfway agree with you . Less torque multiplication will be less likely to spin the tires out of the hole which should move propel and move the truck on out of there instead of spinning . Currently my best 60' and 1/8 has been in tune 3 . Tune 4 has netted the best 1/4 mile but it still spun a...
  11. prostreeter600

    Will 60' improve with 3.42s

    Question to those that have gone from 3.73s to 3.42s . Did your 60' improve or did it get worse ?
  12. prostreeter600

    DRAG & BRAG Videos

    Resurrecting this thread in hopes that you guys might post some recent videos . I'm hoping to post some of my truck running deeper into the 9s once I get the 3.42s in it .
  13. prostreeter600

    CCSB 4x4 Wheelie Bars Needed.

    Was that all fuel or did it jump when you hit the juice ?
  14. prostreeter600

    CCSB 4x4 Wheelie Bars Needed.

    Awesome pic but I agree with everybody else . That looks like a wild crazy ride . Amazed that nothing broke since it unloaded the front tires . It needs some stiffer tighter rebound front coil overs to keep that front end down Lol :D
  15. prostreeter600

    Won't start after alternate fire cam

    It's been many moons ago I don't recall . I had an Edge tuner back then that allowed me to clear the codes , so if I had gotten any codes I just typically cleared them . The fact that I mentioned the Edge tuner should tell you how long ago that was . Lol . Hope you get it figured out .
  16. prostreeter600

    Won't start after alternate fire cam

    Could it be a fuel issue , where your loosing prime . I've had that happen to me with the same exact symptoms.
  17. prostreeter600

    2nd Gear Launch, When to Hit Lockup?

    From personal expierence I would say it depends on your power level and if your launching on top of your chargers . If the tires hold I would say lock it up as soon as you launch it if your on top of your chargers when you launch . I tried locking mine up as discribed but my tires wouldn't hold...
  18. prostreeter600

    Anyone recognize this truck?

    If it's true to it Stickers it definitely worth it .
  19. prostreeter600

    Anyone recognize this truck?

    That's a sweet looking truck !! What's the price tag and what extras does it have ?
  20. prostreeter600

    Belt and Tensioner issues at 5000+rpm

    Great minds think alike Chevy1925 as I too carry my old belt with me as a backup
Top Bottom