Search results

Search the forum Search Articles
  1. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    The few people I have asked if they were running tubes with their 30 x 14 cheater slicks said no they are not .
  2. prostreeter600

    Race prep

    My setup spools very easy but I still like letting the other guy at least get presaged at that point I then start roll boosting, once I’m prestaged I then work on getting fully boosted and bump in and wait for the lights to come down. Ideally I prefer the other lane to be fully staged before I...
  3. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    So Mark are you still 2 WD ? If so is your truck dead hooking out of the hole on those 30 x 14s ?
  4. prostreeter600

    Ff Dynamics electric fans

    It has a sensor that goes into the fins
  5. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    So Trojan366 you preferred the 30 x 14s over the ET Street Rs ?
  6. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    So is Mike running the 30 x 14 Chester Slicks or the ET Street R tires ?
  7. prostreeter600

    Going for tens in the zf. (Mission Accomplished!!!)

    Congrats . Nicely Done
  8. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    I too leave in 2nd. Only way to go
  9. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    With the 3.73s the current wheel tire combo will dead hook on tune 3 , tune 4 and 5 spin out of the hole, the more power I put to it the more spin. LOL. I am hoping that the 3.42s help me with that, if not I'll sell what I have and change my wheel/tire combo.
  10. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    For sure on the tire height limitations. That is mainly due to the fact that we can’t use a 15” wheel . The 12/16 M & H Nostalgia slick is 31.5” tall but it is a bias ply.
  11. prostreeter600

    Question: Which are faster drag radials or cheater slicks/slicks

    I made some changes to my truck over the winter. I want to get some runs in on what I currently have but I am contemplating changing my wheel/tire combination. I'm either going to a 16 x 10 with M & H 30 x 14 cheater slicks, 12/16 Nostalgia slicks or 17 x 10 with 315/50/17 MT ET Street R drag...
  12. prostreeter600

    Diesel Fuel Test

    I agree .
  13. prostreeter600

    Diesel Fuel Test

    Good to know Mark . Thanks for the insight . Il’ll stick to some cetane booster/injector cleaner .
  14. prostreeter600

    Diesel Fuel Test

    Well Mark if I’m at 14/1 compression it sounds like I could benefit from it . I’m thinking 14/1 is considered low to the typical 16.5/1 compression most are running. I figured the more boost an engine is running the more the engine would benefit from a higher cetane fuel . :D
  15. prostreeter600

    Diesel Fuel Test

    What ever happened with this cheap race diesel concoction? Any updates ?
  16. prostreeter600

    Drag Strip Wheels ???

    Cool. Only thing I don’t like about going to a 16 x 10 with 4.5 back space is my truck won’t fit on the trailer any more unless I put another setup on the front and swap em at the track .
  17. prostreeter600

    Drag Strip Wheels ???

    I take it you got the polished Renegades?
  18. prostreeter600

    3.42 Gears and TruTrac

    Could be .
  19. prostreeter600

    3.42 Gears and TruTrac

    I can honestly say that I can’t tell the difference from the 3.73s to the 3.42s . I just hope it helps at the track for a better 60’,better ET and higher MPH.
  20. prostreeter600

    3.42 Gears and TruTrac

    Mark , what has to be adjusted on the TCM . I ask cause I put 3.42s in mine and haven’t adjusted anything. What do they affect other than the speedometer reading? Mine seems to drive and shift fine .
Top Bottom