Search results
-
New Toy
Sweet wish i had some cash for a rail. What are the specs on the trans and motor combo? Stock motor for now or all out build?- 05chevy
- Post #7
- Forum: Drag Racing
-
awaiting motor to DYNO........
Northeast, mideast, or southeast?- 05chevy
- Post #9
- Forum: Sled Pulling
-
Hx40?
If he is just giving that hx40 away i cpuld use that on my 12 valve haha- 05chevy
- Post #9
- Forum: Sled Pulling
-
-
Allison 5sp: ? About nsbu switch
03 and tow haul and over drive button does not work. Dies the nsbu switch have anything to do with that? Thanks- 05chevy
- Thread
- Replies: 3
- Forum: Mike L's Trans Talk
-
Advice on CP3
Are you thinking about going with a wicked or floor it pump?- 05chevy
- Post #65
- Forum: Duramax Hard Parts
-
LB7: Need HELP
I tested the return on the cp3 and injectors and they come out to factory spec. I tested the rail pressure and it is with in gm specs. Replaced all fuel lines and rebuilt the filter head with new filter. Tested the ficm for leaks and it is good. Still having the same problem prime the system... -
Project DH 3.0
X2 haha You going to run something like 3 hx82's or bullseye turbos?- 05chevy
- Post #57
- Forum: Sled Pulling
-
-
-
Project DH 3.0
Man that billet aluminum block is going to look sweet in those frame rails haha. How big is that hub? Looks like a monster- 05chevy
- Post #16
- Forum: Sled Pulling
-
-
LB7: Need HELP
Once you prime the system it will start. Shut it off and rail pressure stays at 1200. Start to crank it over drops to 200. Re prime system and it will start. Is there a test port on the cp3 i can test? -
LB7: Need HELP
Ok i pulled a vacum test on the return side of the fuel system. I blocked of the fuel line coming from the filter to the cp3 and pulled vacuum out of the return line going to the tank. I pulled 25psi and it stayed the for 15 minutes. I also primed the fuel filter while the line to the cp3 was... -
LB7: Need HELP
I bottle tested the return line that is on the driver side of the motor right above the feed line from the tank. I can prime the system and it will start and run fine shut it off and you have to reprime it. I will have to find another laptop because mine took a sh!t on me. Then ill check the... -
-
LB7: Need HELP
I did the bottle test. I used a regular gator aid bottle. And i got 2" on fuel in 1 minute. I dont know what is to much so hopefully you guys can help me out. Also when the primer started to get tight fuel started to come out the return line. Not a bunch but a nice lil stream -
LB7: Need HELP
I went to try it this morning primed it the prime ball got hard and it started to it for a drive everything up to temp. Come back shit it off. Wouldnt start. U can reprime it and it will start some times run for a while. Some time it will just shut off after and minute or 2. Put a different... -
LB7: Need HELP
You can prime it but the primer ball will never get hard to push always kind of soft. -