Search results
-
New valve seals fail
mine is similar to that, worked well- delong_1
- Post #28
- Forum: Duramax Engine Building
-
New valve seals fail
if you pm me your number i can send you pics of the one i used to swap springs with the heads still on the truck.- delong_1
- Post #18
- Forum: Duramax Engine Building
-
New build Porn
I assumed you knew why. I'm not going to call and waste Guy's time with something that in my case is not a concern. I was just curious, that's all- delong_1
- Post #78
- Forum: Smoke Signals
-
New build Porn
I'm just wondering why?? As it is mines over 800 hp sees over 80psi using pos arps. Not a gasket issue to date. Just rolled 10k miles on the motor- delong_1
- Post #75
- Forum: Smoke Signals
-
-
Intercooler boots and clamps for high boost #'s?
I have a mix of a few, ppe included. Ppe boots would be choice. Check out their site they have a ton of options- delong_1
- Post #6
- Forum: Turbo Talk
-
Air Dog 150 just quit
make sure you are getting power at the pump and the wiring and relay are good. If that checks out contact airdog about a replacement motor. -
New valve seals fail
I had a set fail within the first 100 miles. Oem is all I will run now- delong_1
- Post #6
- Forum: Duramax Engine Building
-
-
-
Coolant flowing into crankcase
could also be the oil cooler.- delong_1
- Post #5
- Forum: Duramax Hard Parts
-
Show off your new tools!!!
does your rep ever clean his truck??- delong_1
- Post #257
- Forum: The Tool Crib
-
LB7: s475 over stock high egts
My atmo makes 45psi.... The way to make power and keep egts down is to drive the atmo as hard as possible- delong_1
- Post #24
- Forum: Turbo Talk
-
LB7: s475 over stock high egts
How much boost is the 75 putting out?- delong_1
- Post #7
- Forum: Turbo Talk
-
-
Raising shift point questions.
you need to change the mph and rpm the same % to keep it happy- delong_1
- Post #2
- Forum: Duramax Tuning, Logging, and Gauges
-
what stall is right for me?
mine is about 2200 high altitude and my high pressure is a 71mm.- delong_1
- Post #3
- Forum: Mike L's Trans Talk
-
Cast Vs Forged Pistions
that or you have to run a soft top ring to save the ring land- delong_1
- Post #9
- Forum: Duramax Engine Building
-
Question: Gated big twin setup
You will need a gate to push the atmo- delong_1
- Post #5
- Forum: Turbo Talk
-
Dyno fail
um you wont ever make power unless you drive the atmo harder, you have a gate at all?- delong_1
- Post #5
- Forum: Dynamometer