Search results

  1. turbospoolindmax

    New rebuild p0756 stuck in 2nd gear

    Ok ill put the stock valves back in and go from there! What about springs the the kit I got came with heavier springs are they a good idea?
  2. turbospoolindmax

    New rebuild p0756 stuck in 2nd gear

    Sorry if this post was confusing the truck is NOT fixed yet
  3. turbospoolindmax

    New rebuild p0756 stuck in 2nd gear

    So put the stock valves back in its that what yall recommend?
  4. turbospoolindmax

    New rebuild p0756 stuck in 2nd gear

    no i had a problem with them sticking earlier and so i ordered the trans go ones but in the mean time i took it apart and cleaned the valve slots and that took care of it i just figured i throw the new ones in while i had it apart again
  5. turbospoolindmax

    Adding oil to new AC compressor

    I usually put 4 ounces in the compresser and 4 in the dryer...and just pour it in the holes u may have to spin the compresser by hand to get it all in. I always drain the compresser first so I know how much to put in
  6. turbospoolindmax

    New rebuild p0756 stuck in 2nd gear

    Ya I guess that's not considered a rebuild...however I was very careful and i thought I had everything right and I'd would appreciate any help I can get on this thanks!
  7. turbospoolindmax

    New rebuild p0756 stuck in 2nd gear

    So I just finished rebuilding my trans 07 lbz duramax 6speed. I replaced c1-c4 clutch packs with gpz clutch packs c5 look fine so I didn't replace it. I did the heavier regulator spring and a lock up boost valve and a transgo Jr and new transgo shift valves. Its throwing a p0756 in park I can...
  8. turbospoolindmax

    2007 Chevrolet 2500 hd silverado classic

    turbospoolindmax submitted a new Showcase Item: 2007 Chevrolet 2500 hd silverado classic Read more about this showcase item here...
  9. 2007 Chevrolet 2500 hd silverado classic

    2007 Chevrolet 2500 hd silverado classic

    2007 Chevrolet 2500 hd silverado classic
  10. turbospoolindmax

    Allison 6sp: first time allison build c1 clutch issues

    ok so i guess that was my problem then? just curious why that makes a difference?
  11. turbospoolindmax

    Allison 6sp: first time allison build c1 clutch issues

    i failed to check the spec on the c1 clutch pack... ya i know rookie mistake and i beleve i started with an inside spline and ended with outside spline
  12. turbospoolindmax

    Allison 6sp: first time allison build c1 clutch issues

    hey guys im having issues with my trans i just build worked great for about a day and then it started binding in reverse and really clunking into reverse and it had a few second delay when shifted into drive and it kept getting worse and started going into limp in! so i took the trans out i was...
  13. turbospoolindmax

    LB7: fuel rail plug lb7?

    hey thanx that helps a lot athough im not sure now if that's his problem...his complaint was power loss on WOT but I wonder if it mite be a safety feature on his banks chip...
  14. turbospoolindmax

    LB7: fuel rail plug lb7?

    I installed fuel rail plug in my 04.5 lly with efi live and I was really impressed by the extra fuel it gave me and I was talkin to my buddy with an lb7 and he was wondering if they make a plug for an lb7 and I looked but I couldn't see where u could put a plug on it so I was wondering if u can...