Search results

Search the forum Search Articles
  1. justindavis38

    Got my trans built but shifts extremely hard

    They were all around .072 I think the c4 clutch pack was .068 which was under suncoast recommended .070-.085 but factory calls for .040-.060 so .068 should have been close enough according to who I talked to at suncoast even if it's a couple thousands out of spec it would be fine still. I...
  2. justindavis38

    Got my trans built but shifts extremely hard

    No I checked all my clearances 3 times because my c3 and c4 came with wrong steels I was on the phone with suncoast when I checked all of the clearances it's starting to smooth out some now but 1-2 is still a little rough for my liking but I feel like if I put some traction bars on it that it...
  3. justindavis38

    Got my trans built but shifts extremely hard

    I don't want to have to fix it but if I'm pulling it back out to check clearances is no different then pulling it back out from breaking something lol ima try to clean the turbo solenoid tomorrow hopefully that helps and keep driving it like usual maybe it get better after a few days Sent from...
  4. justindavis38

    Got my trans built but shifts extremely hard

    But right now it doesn't really matter anyway I came out from eating dinner started the truck and the check engine light came on p2563 I have hardly any turbo now lol Sent from my SAMSUNG-SM-G890A using Tapatalk
  5. justindavis38

    Got my trans built but shifts extremely hard

    Cool so drive it like I haven't done anything to it and it should be good? I drove it's pretty easy all day today Sent from my SAMSUNG-SM-G890A using Tapatalk
  6. justindavis38

    Got my trans built but shifts extremely hard

    So what did you do to not break it haha Sent from my SAMSUNG-SM-G890A using Tapatalk
  7. justindavis38

    Got my trans built but shifts extremely hard

    The 3/4 shift is smooth like stock it's the smoothest one but I kinda thought an 80hp tune was low and I've always heard ride around in your big tune so the trans will adjust to that power and not stock power my big tune right now is 100hp but I've done several accelerations through all of the...
  8. justindavis38

    Got my trans built but shifts extremely hard

    Alright I have everything in the valve body in the order of all instructions and manuals so it's not the trim valves Sent from my SAMSUNG-SM-G890A using Tapatalk
  9. justindavis38

    Got my trans built but shifts extremely hard

    It was I just had it set aside I have the valves and springs in the right place according to my manual and the transgo instructions. Sent from my SAMSUNG-SM-G890A using Tapatalk
  10. justindavis38

    Got my trans built but shifts extremely hard

    Well I've put the vb back in and I'm driving it is I let it shift 1-2 at like 1500 rpm it's solid but it's not slamming the rest are getting better as well but 1-2 was what I was worried about the most I got on it a few times and as soon as it shifts to second it just starts spinning same with...
  11. justindavis38

    Got my trans built but shifts extremely hard

    Yea that's the one I had it in on solenoid A sorry Sent from my SAMSUNG-SM-G890A using Tapatalk
  12. justindavis38

    Got my trans built but shifts extremely hard

    Normally open the one to the edge of the vb Sent from my SAMSUNG-SM-G890A using Tapatalk
  13. justindavis38

    Got my trans built but shifts extremely hard

    Yea it was on the valve that's normal you open Sent from my SAMSUNG-SM-G890A using Tapatalk
  14. justindavis38

    Got my trans built but shifts extremely hard

    Sent from my SAMSUNG-SM-G890A using Tapatalk
  15. justindavis38

    Got my trans built but shifts extremely hard

    Yea the orange springs are still in the valve body didn't fish them out didn't think I needed too Sent from my SAMSUNG-SM-G890A using Tapatalk
  16. justindavis38

    Got my trans built but shifts extremely hard

    is that the correct order they go in? Ball inside the valve spring on ball? Sent from my SAMSUNG-SM-G890A using Tapatalk
  17. justindavis38

    Got my trans built but shifts extremely hard

    Alright I have it apart the check balls were in the valve with the spring on top of them like the transgo paper showed I can't find my transgo paper now so I'm going online to find another break down to double check Sent from my SAMSUNG-SM-G890A using Tapatalk
  18. justindavis38

    Got my trans built but shifts extremely hard

    I went by the trans go kit instructions but I just dropped the vb and I'm about to pul l it apart Sent from my SAMSUNG-SM-G890A using Tapatalk
  19. justindavis38

    Got my trans built but shifts extremely hard

    They were in place when the valve body went back together how easily can they unseat? Sent from my SAMSUNG-SM-G890A using Tapatalk
  20. justindavis38

    Got my trans built but shifts extremely hard

    As the title says I finished my trans build with a gmax 5 kit precision converter and input shaft deep pan and shift kit went this morning and had the dealer do a fast relearn with the tech 2 I've let if go through several up shifts easy and it still seems to shift up and down really hard the...
Top Bottom