Search results

Search the forum Search Articles
  1. Clay A.

    The truck got a make over!

    I added another inch to the lift by removing my overload spring and putting in an add leaf. Then I crank the bars till the truck sat level with the back. The wheels are 9.5 inchs wide with a +12 offset. I really wanted something negative but the +12 was all i could find in that style and...
  2. Clay A.

    The truck got a make over!

    Thanks guys.. turned out being more work than i first expected. fingers were very sore after the trim and emblem removal
  3. Clay A.

    Need silver shank nuts for ppe idler and pitman braces

    Ok Thanks! Will pm you my shipping info.
  4. Clay A.

    The truck got a make over!

    So I needed a bit of a change so I gave the truck a little make over.. Raised it up another inch 22" mamba m1 wheels with 37" kumho road venture mt's removed the trim & shaved all emblems except the duramax one While I was at it I pulled the exhaust and painted it and then clean and...
  5. Clay A.

    Need silver shank nuts for ppe idler and pitman braces

    So I got around to installing my ppe braces and found out the gold shank nuts that I got do not work with aftermarket idler and pitman arms. After reading the installation guide online it says there should be silver shank nuts that will work with the aftermarket parts. Does anyone know where I...
  6. Clay A.

    Straight Centerlink

    Well just purchased bigger tires so I think the straight center will have to go. I am going back with cognito or ppe braces to protect my pitman/idler arm. If anyone is interested I would like to get enough out of it to purchase the braces. Or if someone has a nice set of braces they want to...
  7. Clay A.

    Straight Centerlink

    Alright thanks guys.. i'l prob leave it then
  8. Clay A.

    Straight Centerlink

    Yea thats what i figured.. and yea the lift took some of the turning radius away before i added the centerlink.
  9. Clay A.

    Straight Centerlink

    I drive my truck more on the street than I do the track. But its nice to do go to the track with my buddies from time to time and the straight centerlink for 4wd launches is awesome. But i hate trying to park or turn around in tight spots because its decreased my turning radius so much. I can...
  10. Clay A.

    Straight Centerlink

    So I have a straight centerlink installed on my truck right now. It seemed to really decrease my turning radius and drags my tires bad during a sharp turn. Its starting to really get on my nerves so I'm about to put my stock one back on. Would the braces work better to fix this problem? Just...
  11. Clay A.

    custom adjustable integrated V2 mount!!!

    I really hope you are still going to sell these.. one would look really nice on my dash! :thumb:
  12. Clay A.

    Help: Code P0299??

    Thanks for the help!
  13. Clay A.

    Help: Code P0299??

    thanks!. could this mean i have a boost leak somewhere?
  14. Clay A.

    Help: Code P0299??

    My truck keeps throw a P0299 code. It says turbo charger engine underboost. I'm not sure what it means or if I should worry about anything. Can anybody tell me what this is and also how I can fix it. Thanks!
    • Clay A.
    • Thread
    • codes efi live p0229
    • Replies: 22
    • Forum: EFILive
  15. Clay A.

    Hello from NC!!

    I'm from Brevard NC, about a half an hour from Asheville.
  16. Clay A.

    Help: LB7 dsp5 switch

    ah.. that should be the problem. I'll give that a try. Thanks!
  17. Clay A.

    Help: LB7 dsp5 switch

    Yea everything is right.. its just not running the tunes in the last three positions. What could be in the tune thats making it not work? On the last setting I made a lope tune by just adjusting a cell in the TBIQ. The voltage is .50 which is more than 0 and less the 1.00 so it should be...
  18. Clay A.

    Help: LB7 dsp5 switch

    voltages are all in the right ranges and they change with the switch. red wire pin #49 and black wire pin #69.. is that right? I just dunno what it might be because the first 2 work fine but the last 3 don't but the voltages are changing.
  19. Clay A.

    Help: LB7 dsp5 switch

    I installed a lb7 dsp5 switch today on my buddies truck and the base and the first dsp setting works. But i can not get the other three to work. I have modified the dsp tunes but the last three all seem to run like stock. Any suggestions on what i might have done wrong and how to fix this...
    • Clay A.
    • Thread
    • lb7 dsp5 switch
    • Replies: 9
    • Forum: EFILive
  20. Clay A.

    Help: Configuring the V2 for DSP5

    It worked! Thanks! I would have never figured that out.
Top Bottom