Search results
-
Race truck pics
i cant say for sure how much more it has in it , wont know till we try , if the pumps can hold pressure on bigger tunes it should make a bit more still . Thanks Jake ! -
Race truck pics
Well see what we do with these chargers after some more testing , have to see if they make the power they should for there size , and how they hold up. The problem with triple kits is it takes some trial and error to size the turbo's , once we get the turbo's dialed in and come to a final... -
Race truck pics
As most have said we took the truck out for the Weekend on the edge event this last weekend , for the first time out it did good ! Didnt break any records or anything but we are starting off slow till the motor is broke in and we work the bugs out , once everything is 100% well turn the wick up... -
Race truck pics
"Weekend On The Edge" ( local event ) is next weekend :woott: -
Race truck pics
Both , high pressure is CT5 , low pressures are CT43 . here are some quick vids of some runs around the shop parking lot to start breaking in the motor :D , still on a baby tune ( 1200 usec ) and have to tune some smoke out of it but I think she has some serious potential ! one vid is 2wd ... -
Race truck pics
Who did we copy ? Who else has a orange , blue , chrome , polished , yellow engine with triple turbo's ? This photo was taken in 2010 of another truck we built so ...................... :eek::roflmao: all i will say is this :eek::roflmao: mQZmCJUSC6g -
Race truck pics
Thanks Shane , going through vmails in order now , well be up to yours with in the hour . -
-
Race truck pics
They are about 1k cheaper than a GTX 4202 , the high pressure charger i used runs around 1900.00 bucks retail . -
Race truck pics
:secret::roflmao: , i will say we scaled back some of our ambition to just slightly larger than our proven kits , we are still in testing with this brand turbo , so far i really like what they offer for the $$ , they are in the same price range we have been paying for BATMO stuff , and they are... -
Race truck pics
Thanks Ben , for now i am going to stick with the LB7 stuff , if i had a 03/04 truck i might consider it , but on 01 to stay LB7 was the easy route . -
Race truck pics
FINALLY got the black truck up and going again , we were hoping to have it down to St Goerge for the H&S event but missed it by around 10 hours :( , but we will have it out to the track in 2 weeks for weekend on the edge ! took it for a spin Saturday and she is def going to be fast , 1200 usec... -
H&S Sled Pull & Dyno Sept 21-22 St George,UT
What dyno / Dyno's are they using ? trying to figure out what dyno and how they strap down the trucks ? I need to make sure if they strap down by the hitch i build something in time , if the strap by the axle the truck would be fine "as is" .- TrentNell
- Post #27
- Forum: Western Members
-
Gtx 4202
I sold a GTX 4202 to a customer last year , the comp wheel made contact with the comp cover with in the first few thousand miles , it was waste gated and was only being ran as a high pressure turbo , Garrett would not cover it :( , cant say on precision I haven't had any failures yet .- TrentNell
- Post #24
- Forum: Turbo Talk
-
Gtx 4202
You do know that the GTX wheel design ( or any 10-11 blade comp wheel ) is a high pressure design right ? From the mapping it flows no more air down low than the cast wheel does , it just excels in the higher pressure ranges but flows no more down low ( maybe even less ) , I believe the...- TrentNell
- Post #20
- Forum: Turbo Talk
-
H&S Sled Pull & Dyno Sept 21-22 St George,UT
We should be there , I am 99% sure the black truck will be done in time for this one :coolspot:- TrentNell
- Post #13
- Forum: Western Members
-
Gtx 4202
First off there are no maps available for precision chargers , so there cant be "on paper" comparisons , only real world tests of both chargers.- TrentNell
- Post #14
- Forum: Turbo Talk
-
Anyone going to Firebird drag strip this Saturday?
Did you get any logs Dave ? good runs at that weight but it should have some more in it IMOP .- TrentNell
- Post #3
- Forum: Northwest Members
-
planet fix kit
If your on a budget I would skip on the billet planet but do the re-enforced c-2 hub with the band and machined p-1 gear , for 300 bucks its a nice upgrade . We have pushed a few trucks over 1k hp and they have held up good with stock planet and the re-enforced hub ...- TrentNell
- Post #3
- Forum: Mike L's Trans Talk
-
Gtx 4202
Most say the Precision 76mm will outflow the GTX , I dont know first hand though .- TrentNell
- Post #12
- Forum: Turbo Talk