Search results
-
OE Allison Torque Converter Bolt Dimensions needed
Torque Converter Bolt- RVN4ME
- Post #3
- Forum: Mike L's Trans Talk
-
Lly will not prime
If you put air to the tank and no fuel or air came out of the bleeder then you have a clog in the line of a collapsed draw tube. 10-15 psi max. Take off the suction line to the filter head, put your thumb over it, and cycle the primer. If it vacuums, then you've got a supply line problem. If it... -
-
-
lbz cam and crank sensor part number help
GM Part :97365038 SENSOR, CAMSHAFT POSITION(MATING CONNECT W/LEADS USE 13576413) Fitting Vehicle Options:CK2,3(LBZ) GM Part :97365037 SENSOR, CRANKSHAFT POSITION, Fitting Vehicle Options: CK2,3(LBZ,MW7) -
Allison 6sp: 2017 Allison EPC solenoid delete plug
If I could afford one I would look. PCA/EPC Positive Terminal (Wire Color) 3 (Green) Negative Terminal (Wire Color) 1 (Gray) Harness Connector Color Green- RVN4ME
- Post #2
- Forum: Mike L's Trans Talk
-
Allison 5sp: Limp mode bad solenoid
Is that what they told you? Can you get your money back?- RVN4ME
- Post #4
- Forum: Mike L's Trans Talk
-
Allison 5sp: Limp mode bad solenoid
What solinoids are you burning up? I take it your shop changed your spin on and fluid change? Since this a new to you truck you probably don't know its history. At one point Just guessing but I will bet that the previous owner got on it pretty good when this code came up and it happened during...- RVN4ME
- Post #2
- Forum: Mike L's Trans Talk
-
Allison 6sp: 2017 Allison TCM
Is the T87 same as T87A? Found this but I dought it's correctness. https://www.hptuners.com/forum/showthread.php?62334-2017-8-Speed-Allison-Supported!- RVN4ME
- Post #2
- Forum: Duramax Tuning, Logging, and Gauges
-
Allison 5sp: Pan bolt size
GM Part :29537507 BOLT, Transmission Oil Pan,BOLT,AUTOMATIC TRANSMISSION FLUID PAN(M8X1.25X2013,16.9 THREAD,18.0 OUTSIDE DIAMETER,10.9,ZINC COATED (DIPPED OR PLATED)) Require Quantity:14 Package Quantity:1 $2.31- RVN4ME
- Post #3
- Forum: Mike L's Trans Talk
-
Looking for diesel shop in MI
You should make a road trip sometime. Tony's shop puts Eric's to shame. His clean room for engine builds and his clean room for trans builds are pritty impressive. His shop is 50 times the size but he's working on everything from lawn & garden, ATV, watercraft, boats etc..- RVN4ME
- Post #16
- Forum: Midwestern Members
-
P0192 Low Fuel Rail Pressure
http://www.kennedydiesel.com/docs/Duramax%20LBZ%20and%20LMM%20P0087%20Low%20Fuel%20Pressure%20code.htm Search P0087 or Google (Duramax P0087) and you will bring up all the diesel sites. Lots to raed. GM Part #97358556 New OEM $222.93... -
Dmax Sandrail
My Brother in law just built some billet axles for it so it should hold up alittle better.- RVN4ME
- Post #8
- Forum: Callout/Smokeout/Kill Stories
-
Fuel temp sensor
#205 Part #97224993 about $29.49...- RVN4ME
- Post #4
- Forum: Duramax Tuning, Logging, and Gauges
-
Paging The Bac.... The Bac, Aisle One...
Sure looks like Toms truck to me.- RVN4ME
- Post #9
- Forum: Smoke Signals
-
-
DURAMILEAGE tune - Claims 4 to 7 MPG Gain +65hp
I don't know if he's on here or not but cowdoc has tried it. It didn't do what it claimed to do for him so he returned it.- RVN4ME
- Post #9
- Forum: Duramax Tuning, Logging, and Gauges