Recent content by White Lighting

  1. White Lighting

    LB7 BOUNCE

    I roll the scale at 7300lbs in a 8200lb class should I add some more weight to get closer to that 8200lbs?
  2. White Lighting

    LB7 BOUNCE

    That was the cure! Thanks!!
  3. White Lighting

    LB7 BOUNCE

    I have rancho 9000rs adjustable on it. Set at the max. Any recommendations?
  4. White Lighting

    LB7 BOUNCE

    The rules state factory travel
  5. White Lighting

    LB7 BOUNCE

    Source: https://youtu.be/XB6Det4m0IE
  6. White Lighting

    LB7 BOUNCE

    Hitch was set at 26 inches. Which is max height for this class. We can't black the rear solid. Has to have travel, I do have a lead added to the rear springs. Hook point is in the stock postion. I will get the video uploaded for you. Thanks for the help
  7. White Lighting

    LB7 BOUNCE

    Also torsion key bolts are all the way out when pulling.
  8. White Lighting

    LB7 BOUNCE

    Any input on getting rid of this bounce why pulling? I have a DHD centerlink support, tierod sleeves, traction bars, 1 leaf added to the rear springs. Running 55lbs rear 30lbs front air pressure. About 1/4 track it start hopping bad! The truck has a protech composite box. I rolled the scales...
  9. White Lighting

    Pulling distance

    Yeah I did. Clamped the rear springs and lowered the front end. Maxed shocks
  10. White Lighting

    Pulling distance

    Run 50rear 26 up front rear shocks set 9(max) Weighed 7350
  11. White Lighting

    Pulling distance

    Just hooked 298. Bouncing towards the end still. Never bounced with the old shocks (stock shocks). I'm at wits end. Maybe take weight out of the bed
  12. White Lighting

    Pulling distance

    Depends on the track. 99 precent of the time I hold the brake, roll in to the gas and once it starts to pull through the brakes give it hell. If it hooks and doesn't start hopping I keep it pinned. I'm just learning. One of the more experienced guys will be able to tell you better.
  13. White Lighting

    Pulling distance

    Depends on the track. 99 precent of the time I hold the brake, roll in to the gas and once it starts to pull through the brakes give it hell. If it hooks and doesn't start hopping I keep it pinned. I'm just learning. One of the more experienced guys will be able to tell you better.
  14. White Lighting

    Pulling distance

    Front end is dropped low as I can get it and springs are clamped. Track is usually pretty tight we are pulling on tommorow night. Any recommendations on tire pressure? General Grabber ATx 285/75/16 Load Range E with a max tire pressure 80psi Been running 45 rears 32 in front
  15. White Lighting

    Pulling distance

    Is clamping the springs doing the same thing as having ladder bars? If not where do I clamp them? I can get the clamps here local
See more
Top Bottom