Recent content by SRomans84

  1. S

    SAS or not - info needed

    The hardest part is cutting the stock suspension off a fairly expensive vehicle. I run leafs, they work fine and ride pretty good, very stable, I like coilovers better. Might switch to coilovers to go taller, the pure performance kit is made to use a third gen dodge front end, I'd get free...
  2. S

    Help: Solid Front Axle Conversion/4 Link Rear Help?

    I would not run leafsprings. If you are looking at a smaller lift height and a D60, Ballistic Fabrication has all of the brackets needed. axle tabes, coilover mounts, axle and frame mounts for the track bar, heims, bushings ect. You count make a small subframe or try to mount the links to...
  3. S

    power steering pump

    PSC motorsports makes a standard output and high output pump, the high output requires a cooler and having the hydroboost high flowed. Their hydroassist kits are the best in my opinion. I would give them a call or shoot them an email. Kelvin usually answers email quickly I can turn my tires...
  4. S

    alternative to blocks?

    more than likely is will ride better with the stock springs and blocks. There are several companies that make add a leafs that would give you the lift you need but the suspension will be a little stiffer. Carrier spring in Canada can make an add a leaf for anything and they make a very good...
  5. S

    Rear Door Locks

    mine just don't unlock, they lock but wont unlock :mad:
  6. S

    hiem joint tie rods

    I'll occasionally take my bars off and clean the joints with non greasy lube like silicone spray/helps protect them from corrosion. I really dont think you will have any issues if they are quality joints. The joint itself should not rust up. the only time I've had one freeze up is when I got...
  7. S

    Inboard brakes?

    driveline/pinion brake set ups are great for short runs but they put a lot of stress on whatever part of the driveline you attach them to, definately wouldn't run them on the street.. lots of brake fade once the rotor literaly lights up. hummers (H1) have portal hubs not planetaries, the...
  8. S

    Inboard brakes?

    hummers run the rotors off of the pumpkin on each side, but I am not sure if you would have room for a decent sized rotor, pinion brakes are another option but they are basically an on off switch for your brakes -Steve
  9. S

    Pics of Truck

    I have some n-fabs in the garage that I'm going to eventually put on it I'm probably not going to start on the rockwells until summer time, I'm still deciding on weather to keep the 16.5's and brake set up I already have and shorten the front axle or run em full width (79.5") with big brakes...
  10. S

    took some today and posted in the pic section : )

    took some today and posted in the pic section : )
  11. S

    Pics of Truck

    needs washed and looks like crap without the fender flares, I took them off to get painted. Anyone else hate the steps? -Steve
  12. S

    *** New Paint, LMK What you think... ***

    I like it! did you buy a different grill or sand down and paint the stock one? I want to get rid of the chrome on mine -Steve
  13. S

    MF'ing LB7 downpipe bolts

    I put a gt4088 on 2 weeks ago, you will love the way it sounds :D My forearms and knukles are still beat to hell from breaking those bolts, I used a big close ended wrench turning on a breaker bar and socket
  14. S

    Texas members

    I went to TAMUK too, did you go to the luau much? lol not a lot to do there
  15. S

    Broken CV Axles

    where you having this problem when the front wasnt welded?? I've seen a loft of front and rear shafts break because the diff is welded or spooled, there isn't anything to make up for traction differences from side to side which puts a lot of torsional strain on the shafts, but you do get a hell...
See more
Top Bottom