Recent content by moparkxracer

  1. moparkxracer

    Trans cooler

    Called them this morning, I am waiting on a call back for the order number. Seems no one does callbacks anymore..
  2. moparkxracer

    Trans cooler

    I called fludyne and had one made. The cooler worked amazing towing in the desert though the mountains. I want to think the cooler was around 400. The fludyne next to a PPE
  3. moparkxracer

    Heavy towing upgrades?

  4. moparkxracer

    Heavy towing upgrades?

    I’m using a Fluidyne in mine, had them make it with the OE thread so the fittings went right in. Tows cool.
  5. moparkxracer

    Remote oil cooler & bypass filter?

    I do no disconnect the lines when doing an oil change. With the system having thermostat in it my thinking is. oil will not flow though the cooler till the temp is over 190 and the system opens to flow oil. I’d rather have the little bit of use oil than an air pocket. Some will attempt to argue...
  6. moparkxracer

    Remote oil cooler & bypass filter?

    I am using the Mocal adaptor, I’m using a fluidyne cooler that is mounted behind the front bumper. The cooler does have fans but they haven’t turned on yet. My oil temp stays pretty low. I have no issues with oil pressure
  7. moparkxracer

    Sac45 injectors should I be worried

    Lol
  8. moparkxracer

    TurboSmart bov

    It’s the blue wire on the throttle assembly harness. I also wire both power wires to a switched 12v that way the green light does not stay on. Feel free to pm me if needed.
  9. moparkxracer

    Dirty-Maxx after 600hp build regrets

    Did you talk with more then just the one diesel shop, being honest abt your “needs” for the setup? Did you talk with SoCal specifically on the cam? Do you have the high flow veins in the turbo? Truck pulls and street pulling (towing) is not the same, “most” people are not boost launching and...
  10. moparkxracer

    Hello

    I miss the performance side of things, learned a lot from those days !!!
  11. moparkxracer

    Duramax HighPerformance Idler Kit is now available!!!

    I “NEED” one please !!!
  12. moparkxracer

    05 LLY Sleeper Build

    The 3.5 HD clamps welded right to the intercooler. I’m using a Wagler intake that came with a 3.5 inlet.
  13. moparkxracer

    05 LLY Sleeper Build

    I noticed a difference is going with 3.5 driver and pass side tubes.
  14. moparkxracer

    Bed mounted trans coolers

    It’s made by Fluidyne. I called them and had it made. It was cheaper and bigger the some of the name branded ones that are out there.
  15. moparkxracer

    Bed mounted trans coolers

    Fluidyne here
See more
Top Bottom