Recent content by codyn

  1. codyn

    Wrist pins

    97354947 They are about $24 per pin.
  2. codyn

    who sell arias pistons?

    Right now it's 6 to 8 weeks for delivery of pistons.
  3. codyn

    who sell arias pistons?

    Yes they come with both .
  4. codyn

    Question: Where To Buy A Crank?

    That issue with the clearance on the bottom of the piston was fix a while ago. The Pistons will work with both cranks.
  5. codyn

    who sell arias pistons?

    The weights used in this comparison were provided by each individual manufacturer.
  6. codyn

    who sell arias pistons?

    You can get them through DHD, Danville Performance. Here is some more info on them as well. TOTAL WEIGHT SAVINGS OVER THE COMPETITORS DURAMAX PISTONS COMPETITOR 1000 G. COMPETITOR 888 G. COMPETITOR 1088 G. COMPETITOR 480 G. COMPETITOR 1000 G. COMPETITOR 888 G. COMPETITOR 640 G...
  7. codyn

    LB7: Cracked Piston

    Yea a lot of them are going into sled pullers and drag racing so they are not getting the mileage. There are some driving them every day. Have a set in a triple turbo setup. So we will see how well they do in his setup. I have made some little changes but nothing major.
  8. codyn

    LB7: Cracked Piston

    Here are the ring lands after 40,000 miles of use on a Arias piston. It was sent back to Arias to inspect it. They are very happy with the results after that much use.
  9. codyn

    Head Studs

    With triples we had to upgrade to the 625 arp.
  10. codyn

    cast or forged pistons

    Well i figured i'd put it out there since there were a couple of people who seen the piston. People are going to say what there going to say. I rather be up front.
  11. codyn

    cast or forged pistons

    I have seen over 40,000 miles on my arias pistons and had zero blow by. The truck was fuel only. If you run nitrous yes the rings will wear more than if you run fuel only. I have seen one arias piston cracked on the bottom of the piston where the wrist pin is but the broken crankshaft played a...
  12. codyn

    Harland Sharp Roller Rocker Arms 6.6L Duramax Application: 01-12 GM 6.6L Duramax

    On the stock lly they are stock ratio Exhaust 1.69:1, Intake 1.36:1. I did testing for the past year and half or so and did the dyno testing on the stock truck with stock ratio rockers and the built motor testing with the ratio set of rockers.