Recent content by 455buick

  1. 4

    OBDII "Not Ready" for SMOG TEST

    I'm assuming he's meaning that the emissions systems readiness monitors aren't "ready". Some of those monitors take a very long time to meet their criteria to be "ready". I think the line for that smog test would be miles long if they require the vehicle to have every readiness monitor "ready"...
  2. 4

    T87 Swaps

    EFIlive didn't have it mapped out. It won't hurt a transmission if it's not functioning, it'll just have maxed line pressure up to the regulator pressure. Something around 235psi, but don't hold me to that. It's no different than people running a dummy solenoid. It might be a problem with the...
  3. 4

    LLY Ficm

    Guys, this has to be one of the best technical threads I've read in many years on any of the Duramax related sites. I've been around and lurking since about 09 and I've read many many back to like 03. This one is keeping me refreshing the site quite a few times a day. I just want to say great...
  4. 4

    Good laptop for EFI live only

    Thanks for the good info. This gave me some ideas when figuring out what I need to buy.
  5. 4

    Good laptop for EFI live only

    Kinda all of the above if ya really think about it lol. I just don't know much about laptops at all. Battery life would be good. Screen size is kinda what ever, something average. Don't really want the laptop to be too small. I have no idea on pricing for these at all.
  6. 4

    Good laptop for EFI live only

    I have had EFI live since 2010 and my laptop is the same year. I'm ordering a new V3 and I need a new laptop to ONLY use for EFI live. What's people's suggestion on a decent reliable laptop to only run this program? Thanks.
  7. 4

    Allison 10 speed Ratiotek valve body kit

    I'm not seeing any 10L kits on their site unless I'm missing something?
  8. 4

    Torque Converter Questions

    You can really appreciate the rattle when there is no dash or carpet. Honestly not much different than a multi disc manual clutch from the inside of the cab. But either way, I've never had an issue. I just took my bolt together apart and it looks perfect, even on the plates edges, where the...
  9. 4

    LB7 stand alone harness questions

    Thanks for the replies. I may have to look at the pin locations and wire colors of the oem truck side harness to see what matches which diagrams. I wish they had actual "system" diagrams instead of just small sections. I have to bounce around like crazy in the Alldata stuff.
  10. 4

    LB7 stand alone harness questions

    Looking over the pinouts you posted in C1 pins 8 (blank on my diagram and in my truck harness), 24 (blank on my diagram and in my truck harness), 37 (shows inj 6 on your pinout and inj 5 on my pinout) and 44 (shows ign voltage 1 on yours and inj 3 on mine). On C2 pin 2 on my diagrams it shows...
  11. 4

    LB7 stand alone harness questions

    This is what my Alldata shows for this connector. I just looked at my truck side original harness and there are no pins in C1 33 or 35. Maybe these are just for ZF6 trucks?
  12. 4

    LB7 stand alone harness questions

    2001 I'm trying to wire up to run the engine on a stand. The ecm has an Allison tune in it currently but may have to put a manual file in it unless it will run simply by grounding ecm C1 pin 34? Thanks for the help.
  13. 4

    LB7 stand alone harness questions

    I'm getting conflicting info from Alldata vs my Haynes manual. The Haynes manual says ECM C1 pin 33 is for crank voltage but the Alldata ECM C1 pinout shows pin 33 is not used and I haven't found it in any Alldata diagrams. If it is being used where does it go and is it sending power out...
  14. 4

    1/4 mile discussion and time slips post here!

    Yesterday at the Byron Diesel drags in Byron IL I just ran a 10.979 at 125.41mph. The truck is a cclb single s400 based turbo. Weight about 6700lb or so. My name is Coleman Mauch and the owner of the truck is Lane Mauch. I attached the picture of the slip and I can attach a link for video if...
  15. 4

    Allison 6sp: 2 to 1 downshift neutral

    I'm having the exact same issue with my 01. With as common as this seems, Mike L., do you have any insite on this issue?
See more
Top Bottom