LBZ: Wyoming lbz 6.6 DD owner

[colfmas97]

Howdy I'm new here course, owned my lbz for past 3 years and just blew a piston so I will be needing lots of info. Thanks.


White Lbz cc/lb, 111k, efi live dsp 5 by Craig at infinity diesel, 5 inch magnaflow, mbrp DP, SDP y bridge, full egr delete, S&B intake, 66mm Danville drop-in, banks 3 inch hot side, Airdog 165, PPE stage 4 trans, stock engine, stock injectors, stock cp3, race fuel relief valve, Ppe rail fittings, 610 rwhp 1197 lbs, leveled, fuel maverick 20x10 -24, federal couragias 33x12.5. Cognito supports and tie rod sleeves.

Lbz died 3/31/17
over fueling stock piston
Currently building engine
Wagler rods, mahle cast performance pistons, arp studs, 60 nozzles on modified cp3.

Sent from my iPhone using Tapatalk

 

[Mike L.]

Welcome

 

[minerigger]

Where in wyoming? Welcome

Sent from my SM-G900V using Tapatalk

 

[colfmas97]

Moorcroft ( crook county) 30 miles east of Gillette.


White Lbz cc/lb, 111k, efi live dsp 5 by Craig at infinity diesel, 5 inch magnaflow, mbrp DP, SDP y bridge, full egr delete, S&B intake, 66mm Danville drop-in, banks 3 inch hot side, Airdog 165, PPE stage 4 trans, stock engine, stock injectors, stock cp3, race fuel relief valve, Ppe rail fittings, 610 rwhp 1197 lbs, leveled, fuel maverick 20x10 -24, federal couragias 33x12.5. Cognito supports and tie rod sleeves.

Lbz died 3/31/17
over fueling stock piston
Currently building engine
Wagler rods, mahle cast performance pistons, arp studs, 60 nozzles on modified cp3.

Sent from my iPhone using Tapatalk

 

[colfmas97]

Where in wyoming? Welcome

Sent from my SM-G900V using Tapatalk

Bout 2 hours north of where your located.


White Lbz cc/lb, 111k, efi live dsp 5 by Craig at infinity diesel, 5 inch magnaflow, mbrp DP, SDP y bridge, full egr delete, S&B intake, 66mm Danville drop-in, banks 3 inch hot side, Airdog 165, PPE stage 4 trans, stock engine, stock injectors, stock cp3, race fuel relief valve, Ppe rail fittings, 610 rwhp 1197 lbs, leveled, fuel maverick 20x10 -24, federal couragias 33x12.5. Cognito supports and tie rod sleeves.

Lbz died 3/31/17
over fueling stock piston
Currently building engine
Wagler rods, mahle cast performance pistons, arp studs, 60 nozzles on modified cp3.

Sent from my iPhone using Tapatalk

 

[minerigger]

Been there lots of times...used to buy fuel at the truck stop when I chased cranes. Good luck on that motor

Sent from my SM-G900V using Tapatalk

 

[colfmas97]

We are proud of our truck stop #coffee cup

 

[minerigger]

Always had descent food...generally last fuel stop before we bootlegged into Montana

Sent from my SM-G900V using Tapatalk

 

[1ATony]

Thanks for joining, it's great to have you here

Tony