Will a 2003 GMC Sierra 2500 4x4 fit in an enclosed trailer?
- Thread starter braebyrn
- Start date
Ya... fold your mirrors, and figure out a way out. Slider back window? Otherwise out a window onto the hood and over the roof probably. Depends on the truck/trailer really.
Also, make SURE the ramps can hold it, especially if its a flip down door. Seen a truck bust right through before. Also make sure his trailer floor can handle it.
Also, make SURE the ramps can hold it, especially if its a flip down door. Seen a truck bust right through before. Also make sure his trailer floor can handle it.
If the trailer is big enough it will, I fit a 2001 GMC 1500 extra cab w 6 ft bed in mine. Just watch the ramp door.
The axles are rated at 5220# each, so 10440#, but I didn't think about the door. The trailer is brand new too. I do have a 5000# winch, so thats not a problem getting it up there.
I wonder how you handle the door situation? Maybe a couple of tires and some 2x8's?
I wonder how you handle the door situation? Maybe a couple of tires and some 2x8's?
The floor is fine, The Axles are close to max with the truck weight and trailer. Who made the trailer, if the door is real plywood 3/4 inch you are okay.If any less use the 2x8's on the top of the door.
my cousin just bought a beautiful brand new denali 1500. and apparently now they're only available in AWD or 2WD