who wants to help me

[maddogg101920]

:rofl:
A trans guy who works on allisons told my dad that i f'd up on the clutch pack install thats why my truck wont move, even tho i have a stuck solenoid he said i screwed up, so who knows how much a stuck C solenoid would effect my trans....i can believe that i screwed up but i dont wanna drop the trans again and i followed all the instructions word for word....as to what my truck is doing, it has a forward load in every gear, which would make sense cuz i dont think i installed the C1 clutches correct cuz the instructions werent very clear, my trans moves forward in every gear except P and R cuz park wont move cuz of the parking paw, and R is fighting with itself and wont move.

thanks for the help.

 

[2wd_Sled_Puller]

A stuck soilnoid will work wonders with you. As long as u followed word for word and double check everything u should be alright. I installed two suncoast so far with no problems. About to do my 3rd one. Granded these where dodges

 

[Mike L.]

It will have to come out. You must have done something wrong in the C1 pack.

 

[maddogg101920]

It will have to come out. You must have done something wrong in the C1 pack.

thats what i dont wanna have to do, but my trans is acting the same way it did before the rebuild, same codes and everything, but if it has to come out then ill just have to find the time to do it this weekend.

 

[psyco66]

Looks like both of us will be pulling and building are transes this weekend.:nanawoot: I am sure both of us will be calling :mikelsheep:.

 

[maddogg101920]

yea man cuz i tried the solenoid thing just to see if i didnt have to pull the tranny but its still messed up....

 

[maddogg101920]

wow i feel like a tard now :rofl: i pulled the trans and got back into the C1s, went onto the ALTO website and found directions and i screwed up, so i fixed it and tom. im putting the trans back in, ill let you guys know how it goes.

 

[Kat]

wow i feel like a tard now :rofl: i pulled the trans and got back into the C1s, went onto the ALTO website and found directions and i screwed up, so i fixed it and tom. im putting the trans back in, ill let you guys know how it goes.

Well just as along as you found the problem that is all the matters

 

[LarryJewell]

wow i feel like a tard now :rofl: i pulled the trans and got back into the C1s, went onto the ALTO website and found directions and i screwed up, so i fixed it and tom. im putting the trans back in, ill let you guys know how it goes.

:toetap: Well, how did it go, is it fixed

 

[maddogg101920]

nope still has the same problem and now is giving me lots of codes for TCM lost communication and ECM lost communication, the P0100 and P0101 codes still wont rev over 2500rpm in any gear.

 

[maddogg101920]

i think ill be takin my truck to a trans shop this week, i need it to move by next saturday, thats the first pull this year and i wanna be there.

 

[ripmf666]

You got the truck to start and run longer then when we talked when it would start and shut off and wouldnt start at all.I know someone that can fix it, very close and good.

 

[maddogg101920]

yea i fixed the stalling issue and it revs now unlike before but im still getting those codes and forward pressure in the trans in N