LBZ: What's It Worth?
- Thread starter WisconsinHick1
- Start date
In this area I'd say 1800 to 2000 00 I'd try to stick around the 1500 range if possible to make it a great deal.
Well it's over $2000 but not by much and I have a little bit of a drive to pick it up. I might have to stay at your house Scott! :thumb:
It does have a 4L80E but that doesn't sweeten the deal much lol. Now if it had an Allison I would have been there the next day.
van engine..
i paid 5700 for engine with 98k ecm, and all harness from driver seat forward.. around ohio they where running 5500-6500 for LBZ with ~100k on them
Yep I figured van engine. I wish this had the wiring harness and all then I could swap into a classic car like I want too.
i've been quoate 100-150.00 for harness by them selfs...
y-bridge, fuel supply line and intake engine/turbo, coolant outlet, no engine mounted fuel filter, flex plate are only things i found different then a truck engine
Awesome that's good to know thank you sir!
That's not a bad price for a harness either.
i did this to one shortly after getting the swap done.. the 4l85 have 3 "planes" vs the alli have 2 "planes" and the alli is made out of thicker steel as well.. TC bolt patterns are the same 6 bolt 11" both flex plate are 0 balance and are interchangeable to the flywheel part that has the ringgear on it
at maybe 300fwhp rolling 25k too... could have really torn something up if i hadnt heard it go "ping" just a FYI on it :thumb: joshH and the dumpster are still running the 85 flex plate with no problems..