What U-Joints do I need?

[joshgabel]

I have a 2009 - LMM - CCLB - SRW

Chasing vibrations after tire replacement.

Wanting to replace all three joints and Center support bearing on my 2pc steel rear shaft.

Anyone have any part numbers or care to point me to a post that i missed in my search? from what i can can tell its a 1480 or a 1485. just not sure which?

 

[THEFERMANATOR]

1415 or 1485's if it's a steel shaft most likely. Going to have to pull out a mic and measure them to find out

 

[OregonDMAX]

Are you sure it isn't the tires...

 

[c20elephant]

When you do replace the u-joints and center support bearing mark the driveline so it is put back together the same as when taken apart, could be the difference between rebalancing or not rebalancing the entire shaft. Rockauto has a good reference for parts.

This was posted in another thread.

http://www.dennysdriveshaft.com/c629_1415_series_aam...outside..._4.178_x_4.178_inches.html