What is it?

[03 D-max]

I know its a borg warner but searched all over and cant really find any info on it? can anyone help?
http://cgi.ebay.com/John-Deere-Turb...66:2|39:1|72:1171|240:1318|301:1|293:1|294:50

 

[dmaxvaz]

i was interested in those too, but there are no specs about it. it looks like a s300, but there are so many variants of it. it looks like it would bolt right onto a commonrail dodge though. the way the elbow is cast into the comp cover; it will not work well on our dmaxes

 

[McRat]

Yup, looks like a S300 with a T3 mount and Dodge inlet. It's going to be smaller than a 66mm most likely.

 

[McRat]

A little research on the internet, gives the application as a 7.6 I6. Probably a redline no higher than 2500, so it's unlikely to be as big as what is on our Dmaxes.

 

[dmaxvaz]

that elbow makes it awkward fitting on a dmax too

 

[McRat]

High Tech starts with that housing, then machines off the elbow. Not "plug and play".

 

[dmaxvaz]

High Tech starts with that housing, then machines off the elbow. Not "plug and play".

there is cat 3126 s300 that has no elbow(straight outlet) and has a .80 a/r dual port wg housing, i just put one on a 12valve like 3 wks ago and i think htt or industrial injection starts with those; it had some similar casting marks as the htt's and ii's, minus the cat symbol (probably ground off)

 

[03 D-max]

A little research on the internet, gives the application as a 7.6 I6. Probably a redline no higher than 2500, so it's unlikely to be as big as what is on our Dmaxes.

thanks Pat:hello: