Well I guess it's time

sweetdiesel

That's better
Aug 6, 2006
10,390
0
0
52
Thailand
Its at 5500 now with a full tank of fuel. So subtract 17 gallons of fuel, tailgate, seat, torsion set up, stock fuel tank, gut the dash, loose the torsion bars, 1 battery and couple other small things. I think its doable.

either I or you need a different scale.
 

Ne-max

I like turtles
Nov 15, 2011
3,361
64
48
Lincoln, Ne
Was a certified cat scale. Got the print out still.

17 gallons of diesel is 136pds
Battery 39
Torsions 100
T
That's 275 itself. So after I do roll pan, seat, dash, tailgate, stock fuel tank Crap and a little more stripping it shold be under 5000
 

Noreaster

Active member
Jun 13, 2007
2,910
0
36
43
Cape Cod,MA
Its at 5500 now with a full tank of fuel. So subtract 17 gallons of fuel, tailgate, seat, torsion set up, stock fuel tank, gut the dash, loose the torsion bars, 1 battery and couple other small things. I think its doable.

I figured about 385lbs for the stuff in red
 

x MadMAX DIESEL

<<<< No Horsepower
Dec 30, 2008
7,535
1
38
34
Lexington, Ky
Thanks Brian, I'll have to buy a set if I start breaking u joints or twisting shafts. Until then, I hope to get away with the least amount of extra bells and whistles. Cause I'm cheap haha
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,696
5,855
113
Phoenix Az
Thanks Brian, I'll have to buy a set if I start breaking u joints or twisting shafts. Until then, I hope to get away with the least amount of extra bells and whistles. Cause I'm cheap haha

just make sure your pinion angle is within a couple degrees of what the t-case output angle is at. shims are like 10-15 bucks from summit i think. may even be less.
 

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
When did you sell Casper?

2-3 weeks ago

looks good brian! post a pic of t bars dropped and the overload removed, please.
also what offset are the rims and what size tires?

.


The first pic of the truck in front of my house on page 1 is 3" shackles and overload gone. :D Rims are 22x9 with +12 offset, with 305/45 nitto's
You are supposed to be picking me up from the airport......how is that gonna work.:confused:


Colorado. :thumb:
 

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
Don't hate, it will wax the PPE shop delivery truck, Ive seen that thing :roflmao::D



Forced Inductions called me... apparently the 87mm turbine wheel is backordered from BorgWarner for 2-3 weeks, then another 1-2 till F.I. gets the turbo to me... :/


On a brighter note... the rest of the downpipe/intercooler pipe stuff from ATS comes tomorrow, and the drivers side dipstick from Merchant comes Tuesday. Ready to get this truck running :cool:
 

sweetdiesel

That's better
Aug 6, 2006
10,390
0
0
52
Thailand
Was a certified cat scale. Got the print out still.

17 gallons of diesel is 136pds
Battery 39
Torsions 100
T
That's 275 itself. So after I do roll pan, seat, dash, tailgate, stock fuel tank Crap and a little more stripping it shold be under 5000

hey bud, no need for papers I meant to say 350 at best. The good thing is most of these wieghts are posted.

the seat is easy 50lbs they are heavy! the tow hooks are less than 2lbs, tail gate someone wieghed I think 60lbs ?? dwpends on if ya have spray in liner

If you remove the tire mount x member and hitch your close to 90lbs the bumpers is prob 60lbs


I run a Total power battery its 15lbs ish and 1500 ca


Perhaps I need a different scale ?????
 

paint94979

Beer Nazi
Sep 18, 2006
11,715
8
38
37
Brian, call Gillete Diesel if you are having issues sourcing a turbo... They have then in stock
 

RENODMAX

Dead Wrong
Mar 4, 2008
3,602
0
0
Brian I had one of those plugs in my garage just took some digging. I can drop it in the mail if you need it